Add DT bindings for new MXSFB driver using the DRM framework. The old MXSFB fbdev driver bindings are preserved in mxsfb.txt . Signed-off-by: Marek Vasut <marex@xxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Cc: Rob Herring <robh@xxxxxxxxxx> Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx> Cc: Fabio Estevam <fabio.estevam@xxxxxxx> Cc: Shawn Guo <shawnguo@xxxxxxxxxx> --- .../devicetree/bindings/display/mxsfb-drm.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/mxsfb-drm.txt diff --git a/Documentation/devicetree/bindings/display/mxsfb-drm.txt b/Documentation/devicetree/bindings/display/mxsfb-drm.txt new file mode 100644 index 0000000..e70d337 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mxsfb-drm.txt @@ -0,0 +1,33 @@ +* Freescale MXS LCD Interface (LCDIF) with KMS/DRM support + +Required properties: +- compatible: Should be "fsl,imx23-lcdif" for i.MX23. + Should be "fsl,imx28-lcdif" for i.MX28 and i.MX6SX. +- reg: Address and length of the register set for lcdif +- interrupts: Should contain lcdif interrupts +- clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. +- clock-names: A list of clock names. For MXSFB it should contain: + - "pix" for the MXSFB block clock + - (optional) "axi", "disp_axi" for the bus interface clock on MX6SX + +Required sub-nodes: + - port: The connection to an encoder chip. + +Example: + + lcdif1: lcdif@02220000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; + reg = <0x02220000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + + port { + parallel_out: endpoint { + remote-endpoint = <&panel_in_parallel>; + }; + }; + }; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html