Although the SEAD3 board has already made some minimal use of device tree, until now most peripherals have been left probed by platform code. This series converts all SEAD3 peripherals to instead be probed from device tree. The amount of platform code is significantly reduced leaving SEAD3 primed & ready for a wider task of genericising the kernel. Applies atop v4.8-rc3. Paul Burton (19): MIPS: SEAD3: Split obj-y entries across lines MIPS: SEAD3: Probe interrupt controllers using DT MIPS: SEAD3: Probe UARTs using DT MIPS: SEAD3: Use generic ns16550a earlycon support MIPS: SEAD3: Probe ethernet controller using DT MIPS: SEAD3: Probe EHCI controller using DT usb: host: ehci-sead3: Remove SEAD-3 EHCI code SEAD3: Probe parallel flash via DT MIPS: SEAD3: Use register-bit-led driver via DT for LEDs leds: Remove SEAD3 driver MIPS: SEAD3: Reset via generic syscon-reboot driver & DT MIPS: SEAD3: Use generic restart-poweroff driver MIPS: SEAD3: Parse memsize in DT shim MIPS: SEAD3: Drop use of cobalt fbdev driver fbdev: cobalt_lcdfb: Drop SEAD3 support dt-bindings: img-ascii-lcd: Document a binding for simple ASCII LCDs auxdisplay: img-ascii-lcd: driver for simple ASCII LCD displays MIPS: SEAD3: Use img-ascii-lcd driver MIPS: SEAD3: Remove custom read_persistent_clock .../bindings/auxdisplay/img-ascii-lcd.txt | 17 + MAINTAINERS | 6 + arch/mips/Kconfig | 1 - arch/mips/boot/dts/mti/sead3.dts | 237 +++++++++++ arch/mips/configs/sead3_defconfig | 8 + arch/mips/include/asm/mach-sead3/sead3-dtshim.h | 29 ++ arch/mips/include/asm/mips-boards/sead3int.h | 32 -- arch/mips/mti-sead3/Makefile | 10 +- arch/mips/mti-sead3/sead3-console.c | 46 --- arch/mips/mti-sead3/sead3-display.c | 77 ---- arch/mips/mti-sead3/sead3-dtshim.c | 292 ++++++++++++++ arch/mips/mti-sead3/sead3-init.c | 52 --- arch/mips/mti-sead3/sead3-int.c | 27 +- arch/mips/mti-sead3/sead3-lcd.c | 43 -- arch/mips/mti-sead3/sead3-platform.c | 223 ----------- arch/mips/mti-sead3/sead3-reset.c | 40 -- arch/mips/mti-sead3/sead3-setup.c | 77 +--- arch/mips/mti-sead3/sead3-time.c | 8 - drivers/auxdisplay/Kconfig | 9 + drivers/auxdisplay/Makefile | 1 + drivers/auxdisplay/img-ascii-lcd.c | 443 +++++++++++++++++++++ drivers/leds/Kconfig | 10 - drivers/leds/Makefile | 1 - drivers/leds/leds-sead3.c | 78 ---- drivers/usb/host/ehci-hcd.c | 5 - drivers/usb/host/ehci-sead3.c | 185 --------- drivers/video/fbdev/Kconfig | 2 +- drivers/video/fbdev/cobalt_lcdfb.c | 42 -- 28 files changed, 1056 insertions(+), 945 deletions(-) create mode 100644 Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt create mode 100644 arch/mips/include/asm/mach-sead3/sead3-dtshim.h delete mode 100644 arch/mips/include/asm/mips-boards/sead3int.h delete mode 100644 arch/mips/mti-sead3/sead3-console.c delete mode 100644 arch/mips/mti-sead3/sead3-display.c create mode 100644 arch/mips/mti-sead3/sead3-dtshim.c delete mode 100644 arch/mips/mti-sead3/sead3-lcd.c delete mode 100644 arch/mips/mti-sead3/sead3-platform.c delete mode 100644 arch/mips/mti-sead3/sead3-reset.c create mode 100644 drivers/auxdisplay/img-ascii-lcd.c delete mode 100644 drivers/leds/leds-sead3.c delete mode 100644 drivers/usb/host/ehci-sead3.c -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
