On Wednesday 24 August 2016 02:08 PM, Karl Beldan wrote: > On Tue, Aug 23, 2016 at 04:46:03PM +0530, Sekhar Nori wrote: >> On Tuesday 23 August 2016 04:39 PM, Sekhar Nori wrote: >>> On Friday 05 August 2016 04:30 AM, Kevin Hilman wrote: >>>> Karl Beldan <kbeldan@xxxxxxxxxxxx> writes: >>>> >>>>> On Thu, Aug 04, 2016 at 12:20:27PM -0700, Kevin Hilman wrote: >>>>>> Karl Beldan <kbeldan@xxxxxxxxxxxx> writes: >>>>>> >>>>>>> This adds 2 pinctrl groups (rtscts, rxtx) for each of the 3 UARTs. >>>>>>> >>>>>>> Signed-off-by: Karl Beldan <kbeldan@xxxxxxxxxxxx> >>>>>> >>>>>> Should da850-evm be updated to use the serial2_rxtx_pins also? >>>>>> >>>>> I could not find the EVM schematics on the net and I only have an LCDK, >>>>> but according to the code it should, however I can't tell whether flow >>>>> control pins are used. >>>> >>>> Ok, let's just leave it for now, since it's working fine. Sekhar can >>>> fix that up if he can dig up the schematics. >>> >>> Looks like the flow control pins are being used for McASP also on the >>> EVM. So lets leave the EVM as-is. >> >> Rather, the EVM dts file should be updated to use serial2_rxtx_pins like >> the LCDK. Right now it seems to be relying on bootloader to serial2 >> setup pimux correctly. I can make a patch to fix that. Or if you can do >> it, that will be great too. >> > > Indeed ATM the EVM relies on the bootloader to setup the pin muxing. > > I just checked the uart pins routing of the EVM, the dts: > - should reclaim serial2_rxtx_pins and serial2_rtscts_pins Can you please clarify what you mean by dts should "reclaim". You mean move the pins from da850.dtsi to da850-evm.dts or something else? Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
