Re: [PATCH] ARM: dts: da850: Add missing pin muxing for the UARTs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tuesday 23 August 2016 04:39 PM, Sekhar Nori wrote:
> On Friday 05 August 2016 04:30 AM, Kevin Hilman wrote:
>> Karl Beldan <kbeldan@xxxxxxxxxxxx> writes:
>>
>>> On Thu, Aug 04, 2016 at 12:20:27PM -0700, Kevin Hilman wrote:
>>>> Karl Beldan <kbeldan@xxxxxxxxxxxx> writes:
>>>>
>>>>> This adds 2 pinctrl groups (rtscts, rxtx) for each of the 3 UARTs.
>>>>>
>>>>> Signed-off-by: Karl Beldan <kbeldan@xxxxxxxxxxxx>
>>>>
>>>> Should da850-evm be updated to use the serial2_rxtx_pins also?
>>>>
>>> I could not find the EVM schematics on the net and I only have an LCDK,
>>> but according to the code it should, however I can't tell whether flow
>>> control pins are used.
>>
>> Ok, let's just leave it for now, since it's working fine.  Sekhar can
>> fix that up if he can dig up the schematics.
> 
> Looks like the flow control pins are being used for McASP also on the
> EVM. So lets leave the EVM as-is.

Rather, the EVM dts file should be updated to use serial2_rxtx_pins like
the LCDK. Right now it seems to be relying on bootloader to serial2
setup pimux correctly. I can make a patch to fix that. Or if you can do
it, that will be great too.

Regards,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux