Karl Beldan <kbeldan@xxxxxxxxxxxx> writes: > This adds 2 pinctrl groups (rtscts, rxtx) for each of the 3 UARTs. > > Signed-off-by: Karl Beldan <kbeldan@xxxxxxxxxxxx> Should da850-evm be updated to use the serial2_rxtx_pins also? Tested on LCDK (which uses the serial2 pins). Tested-by: Kevin Hilman <khilman@xxxxxxxxxxxx> Kevin > --- > arch/arm/boot/dts/da850.dtsi | 36 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > > diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi > index 25f0f8e..bc10e7e 100644 > --- a/arch/arm/boot/dts/da850.dtsi > +++ b/arch/arm/boot/dts/da850.dtsi > @@ -41,6 +41,42 @@ > pinctrl-single,function-mask = <0xf>; > status = "disabled"; > > + serial0_rtscts_pins: pinmux_serial0_rtscts_pins { > + pinctrl-single,bits = < > + /* UART0_RTS UART0_CTS */ > + 0x0c 0x22000000 0xff000000 > + >; > + }; > + serial0_rxtx_pins: pinmux_serial0_rxtx_pins { > + pinctrl-single,bits = < > + /* UART0_TXD UART0_RXD */ > + 0x0c 0x00220000 0x00ff0000 > + >; > + }; > + serial1_rtscts_pins: pinmux_serial1_rtscts_pins { > + pinctrl-single,bits = < > + /* UART1_CTS UART1_RTS */ > + 0x00 0x00440000 0x00ff0000 > + >; > + }; > + serial1_rxtx_pins: pinmux_serial1_rxtx_pins { > + pinctrl-single,bits = < > + /* UART1_TXD UART1_RXD */ > + 0x10 0x22000000 0xff000000 > + >; > + }; > + serial2_rtscts_pins: pinmux_serial2_rtscts_pins { > + pinctrl-single,bits = < > + /* UART2_CTS UART2_RTS */ > + 0x00 0x44000000 0xff000000 > + >; > + }; > + serial2_rxtx_pins: pinmux_serial2_rxtx_pins { > + pinctrl-single,bits = < > + /* UART2_TXD UART2_RXD */ > + 0x10 0x00220000 0x00ff0000 > + >; > + }; > nand_cs3_pins: pinmux_nand_pins { > pinctrl-single,bits = < > /* EMA_OE, EMA_WE */ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html