On Sat, Jul 09, 2016 at 10:00:53AM +0530, Rajesh Bhagat wrote: > Describes the qoriq usb 2.0 controller driver binding, currently used > for LS1021A and LS1012A platform. > > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@xxxxxxx> > --- > Changes in v2: > - Adds DT binding documentation for qoriq usb 2.0 controller > - Changed the compatible string to fsl,ci-qoriq-usb2 > > .../devicetree/bindings/usb/ci-hdrc-qoriq.txt | 34 ++++++++++++++++++++++ > 1 file changed, 34 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt > > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt > new file mode 100644 > index 0000000..8ad7306 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt > @@ -0,0 +1,34 @@ > +* Freescale QorIQ SoC USB 2.0 Controllers > + > +Required properties: > +- compatible: Should be "fsl,ci-qoriq-usb2" > + Wherever applicable, the IP version of the USB controller should > + also be mentioned (for eg. fsl,ci-qoriq-usb2-vX.Y). > + where, X.Y is IP version of USB controller. Please document known IP versions. > +- reg: Should contain registers location and length > +- interrupts: Should contain controller interrupt > +- phy-names: from the *Generic PHY* bindings > +- phys: from the *Generic PHY* bindings > +- clocks: clock provider specifier > +- clock-names: shall be "usb2-clock" clock-names is kind of pointless for a single clock and '-clock' is redundant. > +Refer to clk/clock-bindings.txt for generic clock consumer properties > + > +Recommended properties: > +- dr_mode: One of "host" or "peripheral". > +- phy_type: the type of the phy connected to the core. Should be one > + of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this > + property the PORTSC register won't be touched > + > +Examples: > +usb@8600000 { > + compatible = "fsl,ci-qoriq-usb2", > + "fsl,ci-qoriq-usb2-v2.5"; Order should be most specific to least specific. > + reg = <0x0 0x8600000 0x0 0x1000>; > + interrupts = <0 139 0x4>; > + phy-names = "usb2-phy"; > + phys = <&usbphy0>; > + clock-names = "usb2-clock"; > + clocks = <&clockgen 4 3>; > + dr_mode = "host"; > + phy_type = "ulpi"; > +}; > -- > 2.6.2.198.g614a2ac > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html