On Sat, Jul 09, 2016 at 10:00:55AM +0530, Rajesh Bhagat wrote: > Describes the qoriq usb 2.0 phy driver binding, currently used > for LS1021A and LS1012A platform. > > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@xxxxxxx> > --- > Changes in v2: > - Adds DT binding documentation for qoriq usb 2.0 phy > - Changed the compatible string to fsl,qoriq-usb2-phy > > .../devicetree/bindings/phy/qoriq-usb2-phy.txt | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/qoriq-usb2-phy.txt > > diff --git a/Documentation/devicetree/bindings/phy/qoriq-usb2-phy.txt b/Documentation/devicetree/bindings/phy/qoriq-usb2-phy.txt > new file mode 100644 > index 0000000..f043855 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/qoriq-usb2-phy.txt > @@ -0,0 +1,22 @@ > +QorIQ SoC USB 2.0 PHY > + > +Required properties: > + - compatible: should be "fsl,qoriq-usb2-phy", > + Wherever applicable, the version of the USB PHY should > + also be mentioned (for eg. fsl,qoriq-usb2-phy-vX.Y). > + where, X = Phy vendor(Legacy = 1, NXP = 2) and Y = PHY version What does Legacy mean? FSL? Use SoC specific compatible strings. > + - reg : Address and length of the usb phy control register set. > + - phy_type : For multi port host USB controllers, should be one of > + "ulpi", or "serial". For dual role USB controllers, should be > + one of "ulpi", "utmi", "utmi_wide", or "serial". > + > +The main purpose of this PHY driver is to enable the USB PHY reference clock > +gate on the QorIQ SOC for USB2 PHY OR implement errata workaround in > +future. Otherwise it is just an NOP PHY driver. > + > +usbphy0: usbphy@8600000 { > + compatible = "fsl,qoriq-usb2-phy" "fsl,qoriq-usb2-phy-vX.Y"; most specific first. > + reg = <0x0 0x8600000 0x0 0x1000>; > + #phy-cells = <0>; > + phy_type = "ulpi"; > +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html