[PATCH v2 2/5] usb: DT binding documentation for qoriq usb 2.0 controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Describes the qoriq usb 2.0 controller driver binding, currently used
for LS1021A and LS1012A platform.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@xxxxxxx>
---
Changes in v2: 
 - Adds DT binding documentation for qoriq usb 2.0 controller
 - Changed the compatible string to fsl,ci-qoriq-usb2

 .../devicetree/bindings/usb/ci-hdrc-qoriq.txt      | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt
new file mode 100644
index 0000000..8ad7306
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt
@@ -0,0 +1,34 @@
+* Freescale QorIQ SoC USB 2.0 Controllers
+
+Required properties:
+- compatible: Should be "fsl,ci-qoriq-usb2"
+  Wherever applicable, the IP version of the USB controller should
+  also be mentioned (for eg. fsl,ci-qoriq-usb2-vX.Y).
+  where, X.Y is IP version of USB controller.
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+- phy-names: from the *Generic PHY* bindings
+- phys: from the *Generic PHY* bindings
+- clocks: clock provider specifier
+- clock-names: shall be "usb2-clock"
+Refer to clk/clock-bindings.txt for generic clock consumer properties
+
+Recommended properties:
+- dr_mode: One of "host" or "peripheral".
+- phy_type: the type of the phy connected to the core. Should be one
+  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+  property the PORTSC register won't be touched
+
+Examples:
+usb@8600000 {
+	compatible =  "fsl,ci-qoriq-usb2",
+		      "fsl,ci-qoriq-usb2-v2.5";
+	reg = <0x0 0x8600000 0x0 0x1000>;
+	interrupts = <0 139 0x4>;
+	phy-names = "usb2-phy";
+	phys = <&usbphy0>;
+	clock-names = "usb2-clock";
+	clocks = <&clockgen 4 3>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+};
-- 
2.6.2.198.g614a2ac

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux