On 2016年07月11日 16:03, Arnd Bergmann wrote:
On Sunday, July 10, 2016 3:27:26 PM CEST Wan Zongshun wrote:
+ ret = of_property_read_string(np, "compatible", &soc_dev_attr->soc_id);
+ if (ret)
return -EINVAL;
+
+ soc_dev_attr->machine = "NUC900EVB";
+ soc_dev_attr->family = "NUC900";
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr);
+ return -ENODEV;
+ }
+
+ ret = regmap_read(syscon_regmap, GCR_CHIPID, &nuc900_chipid);
+ if (ret)
+ return -ENODEV;
+
+ device_create_file(soc_device_to_device(soc_dev), &nuc900_chipid_attr);
+ device_create_file(soc_device_to_device(soc_dev), &nuc900_version_attr);
+
+ dev_info(&pdev->dev, "Nuvoton Chip ID: 0x%x, Version ID:0x%x\n",
+ nuc900_chipid & GCR_CHIPID_MASK,
+ (nuc900_chipid >> 24) & 0xff);
I'm still a bit unsure about the set of attributes here.
- The "soc_id" is read from the device tree from the field that contains
the board name, I think for consistency you should try to map the
GCR_CHIPID to the name of the SoC and assign that here
- The "machine" is hardcoded to "NUC900EVB", which in turn looks like
a particular board but not the one you are running on. Maybe read
that from the DT instead?
- The "revision" is not filled at all, I would suggest using something
derived from the GCR_CHIPID register here
- you have two nonstandard attributes "chipid" and "version", which
I'd hope to avoid -- the set of standard attributes is supposed to
give enough information about the machine, and platform independent
user space will never read those.
So, Maybe I can remove those two codes, no need push those information
to user space?
device_create_file(soc_device_to_device(soc_dev), &nuc900_chipid_attr);
device_create_file(soc_device_to_device(soc_dev), &nuc900_version_attr);
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html