On Fri, Jul 08, 2016 at 02:58:39PM +0100, Russell King wrote: > Currently, the ports as seen from the rear number as: > > eth0 sfp lan5 lan4 lan3 lan2 lan1 lan6 > > which is illogical - this came about because the rev 2.0 boards have the > LEDs on the front for the DSA switch (lan5-1) reversed. Rev 2.1 boards > fixed the LED issue, and the Clearfog case numbers the lan ports > increasing from left to right. > > Maintaining this illogical numbering causes confusion, with reports that > "my link isn't coming up" and "my connection negotiates 10base-Half" > both of which are due to people thinking that the port next to the SFP > is lan1. > > Fix this by renumbering the ports to match people's expectations. > > Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> Reviewed-by: Andrew Lunn <andrew@xxxxxxx> Andrew -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html