Hi, On ven., juil. 08 2016, Andrew Lunn <andrew@xxxxxxx> wrote: > On Fri, Jul 08, 2016 at 02:58:39PM +0100, Russell King wrote: >> Currently, the ports as seen from the rear number as: >> >> eth0 sfp lan5 lan4 lan3 lan2 lan1 lan6 >> >> which is illogical - this came about because the rev 2.0 boards have the >> LEDs on the front for the DSA switch (lan5-1) reversed. Rev 2.1 boards >> fixed the LED issue, and the Clearfog case numbers the lan ports >> increasing from left to right. >> >> Maintaining this illogical numbering causes confusion, with reports that >> "my link isn't coming up" and "my connection negotiates 10base-Half" >> both of which are due to people thinking that the port next to the SFP >> is lan1. >> >> Fix this by renumbering the ports to match people's expectations. >> >> Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> > > Reviewed-by: Andrew Lunn <andrew@xxxxxxx> I missed this patch, but I now applied it on mvebu/dt-4.9 Thanks, Gregory -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html