Re: [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Nov 20, 2013 at 5:14 PM, boris brezillon
<b.brezillon@xxxxxxxxxxx> wrote:
> On 20/11/2013 15:59, Jean-Christophe PLAGNIOL-VILLARD wrote:
>> On 13:06 Wed 28 Aug     , Boris BREZILLON wrote:

>>> mmc0_slot0_switch-0 {
>>> +                                               atmel,pins =
>>> +                                                       <AT91_PIOB 22
>>> AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(1))>;
>>> +                                       };
>>
>> nack this is a regulator the pinctrl API is not done for gpio default
>> value
>
> I know this can be represented as a regulator, but looking at the datasheet,
> this looks more like a switch than a regulator.

No matter whether it's a switch or a GPIO regulator it seems we
are in violent agreement that it should not be controlled by the
pin control states at least.

Start with making it a GPIO then you can figure out whether
a GPIO regulator or drivers/extcon/extcon-gpio.c should be
used.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux