On 02/06/16 12:14, Rob Herring wrote:
> On Sun, May 29, 2016 at 01:12:02PM +0200, Carlo Caione wrote:
> > From: Carlo Caione <carlo@xxxxxxxxxxxx>
> >
> > Add the binding documentation for the Amlogic secure monitor driver.
> >
> > Signed-off-by: Carlo Caione <carlo@xxxxxxxxxxxx>
> > ---
> > .../bindings/firmware/meson/meson_sm.txt | 33 ++++++++++++++++++++++
> > 1 file changed, 33 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
> >
> > diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
> > new file mode 100644
> > index 0000000..6f0b5bc
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
> > @@ -0,0 +1,33 @@
> > +* Amlogic Secure Monitor
> > +
> > +In the Amlogic SoCs the Secure Monitor code is used to provide access to the
> > +NVMEM, enable JTAG, set USB boot, etc...
> > +
> > +Required properties for the secure monitor node:
> > +- compatible: Should be "amlogic,meson-gxbb-sm"
> > +
> > +Example:
> > +
> > + firmware {
> > + compatible = "simple-bus";
>
> Drop this. Sorry, but no abusing simple-bus to get automagic creation of
> your platform device.
Sounds reasonable. I can hook this up to some *_initcall. What about
introducing a new FIRMWARE_OF_DECLARE() ?
Cheers,
--
Carlo Caione
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
