> -----Original Message----- > From: Rob Herring [mailto:robh@xxxxxxxxxx] > Sent: 2016年6月3日 9:54 > To: Yang, Wenyou <Wenyou.Yang@xxxxxxxxx> > Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>; Greg Kroah-Hartman > <gregkh@xxxxxxxxxxxxxxxxxxx>; Ferre, Nicolas <Nicolas.FERRE@xxxxxxxxx>; > Pawel Moll <pawel.moll@xxxxxxx>; Mark Brown <broonie@xxxxxxxxxx>; Ian > Campbell <ijc+devicetree@xxxxxxxxxxxxxx>; Kumar Gala <galak@xxxxxxxxxxxxxx>; > Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>; linux- > kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx > Subject: Re: [PATCH v2 1/2] usb: ohci-at91: Forcibly suspend ports while USB > suspend > > On Wed, Jun 01, 2016 at 12:29:59PM +0800, Wenyou Yang wrote: > > In order to the save power consumption, as a workaround, suspend > > forcibly the USB PORTA/B/C via set the SUSPEND_A/B/C bits of OHCI > > Interrupt Configuration Register in the SFRs while OHCI USB suspend. > > > > This suspend operation must be done before the USB clock is disabled, > > resume after the USB clock is enabled. > > > > Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx> > > --- > > > > Changes in v2: > > - Add compatible to support forcibly suspend the ports. > > - Add soc/at91/at91_sfr.h to accommodate the defines. > > - Add error checking for .sfr_regmap. > > - Remove unnecessary regmap_read() statement. > > > > .../devicetree/bindings/usb/atmel-usb.txt | 5 +- > > drivers/usb/host/ohci-at91.c | 80 +++++++++++++++++++++- > > include/soc/at91/at91_sfr.h | 29 ++++++++ > > 3 files changed, 111 insertions(+), 3 deletions(-) create mode > > 100644 include/soc/at91/at91_sfr.h > > > > diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt > > b/Documentation/devicetree/bindings/usb/atmel-usb.txt > > index 5883b73..3e3e58a 100644 > > --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt > > +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt > > @@ -3,8 +3,9 @@ Atmel SOC USB controllers OHCI > > > > Required properties: > > - - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers > > - used in host mode. > > + - compatible: Should be one of the following > > + "atmel,at91rm9200-ohci" for USB controllers used in host mode. > > + "atmel,sama5d2-ohci" for SAMA5D2 which can force to suspend. > > That may be why you need this now, but that is irrelevant to having a chip specific > compatible string. Maybe a property is better. Best Regards, Wenyou Yang ?韬{.n?????%??檩??w?{.n????z谵{???塄}?财??j:+v?? ? ???2??璀??摺?囤??z夸z罐?+?????w棹f
