Signed-off-by: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
---
Changes in v2:
- Changed vbus_host optional property from gpio to regulator.
- Specified vbus_otg-supply optional property.
- Specified otg_id and otg_bvalid property.
.../bindings/phy/phy-rockchip-inno-usb2.txt | 55 ++++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
new file mode 100644
index 0000000..132e707
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -0,0 +1,55 @@
+ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
+
+Required properties (phy (parent) node):
+ - compatible : should contain:
+ * "rockchip,rk3366-usb2phy"
+ * "rockchip,rk3399-usb2phy"
+ - #clock-cells : should be 0.
+ - clock-names : specify the 480m output clk name.
+
+Optional properties:
+ - vbus_host-supply : phandle to a regulator that supplies host vbus.
+ - vbus_otg-supply : phandle to a regulator that supplies otg vbus.
+
+Required nodes : a sub-node is required for each port the phy provides.
+ The sub-node name is used to identify host or otg port.
+
+Required properties (port (child) node):
+ - #phy-cells : must be 0. See ./phy-bindings.txt for details.
+ - interrupts : specify an interrupt for each entry in interrupt-names.
+ - interrupt-names : a list which shall be the following entries:
+ * "otg_id" : for the otg id interrupt.
+ * "otg_bvalid" : for the otg vbus interrupt.
+ * "linestate" : for the host or otg linestate interrupt.
+
+Example:
+
+grf: syscon@ff770000 {
+ compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+...
+
+ u2phy: usb2-phy {
+ compatible = "rockchip,rk3366-usb2phy";
+ #clock-cells = <0>;
+ clock-output-names = "sclk_otgphy0_480m";
+
+ u2phy_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "otg_id", "otg_bvalid", "linestate";
+ status = "okay";
+ };
+
+ u2phy_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "okay";
+ };
+ };
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
