The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy IP block than rk3288 and before, and most of phy-related registers are also different from the past, so a new phy driver is required necessarily. These series patches add phy-rockchip-inno-usb2.c and the corresponding documentation. Changes in v2: - Specified more hardware-description into the devicetree bindings. - Optimized some process of driver. Frank Wang (2): Documentation: bindings: add DT documentation for Rockchip USB2PHY phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy .../bindings/phy/phy-rockchip-inno-usb2.txt | 55 ++ drivers/phy/Kconfig | 7 + drivers/phy/Makefile | 1 + drivers/phy/phy-rockchip-inno-usb2.c | 604 ++++++++++++++++++++ 4 files changed, 667 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html