> >
> >> +
> >> +static int rockchip_pcie_rd_other_conf(struct rockchip_pcie_port *pp,
> >> + struct pci_bus *bus, u32 devfn,
> >> + int where, int size, u32 *val)
> >> +{
> >> + u32 busdev;
> >> +
> >> + busdev = PCIE_ECAM_ADDR(bus->number, PCI_SLOT(devfn),
> >> + PCI_FUNC(devfn), where);
> >> +
> >> + if (busdev & (size - 1)) {
> >> + *val = 0;
> >> + return PCIBIOS_BAD_REGISTER_NUMBER;
> >> + }
> >> +
> >> + if (size == 4) {
> >> + *val = readl(pp->reg_base + busdev);
> >> + } else if (size == 2) {
> >> + *val = readw(pp->reg_base + busdev);
> >> + } else if (size == 1) {
> >> + *val = readb(pp->reg_base + busdev);
> >> + } else {
> >> + *val = 0;
> >> + return PCIBIOS_BAD_REGISTER_NUMBER;
> >> + }
> >> + return PCIBIOS_SUCCESSFUL;
> >> +}
> >> +
> >
> > This looks like the normal ECAM operations, you could just call those.
>
> I read ECAM reference code, I found it not support ioremap config space
> for each bus individually on 64-bit systems. Our soc is 64-bit system,
> and bus0 config space base address is 0xfda00000, bus1 base address is
> 0xf8100000. So I think it is not normal ECAM operations, I do not know
> if I have understood correctly?
>
Hi,
I think Arnd was suggesting to use generic config read/write calls, pci_generic_config_read/pci_generic_config_write
which does above functionality.
Bharat
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
