On Friday, May 20, 2016 6:29:16 PM CEST Shawn Lin wrote:
> +static int rockchip_pcie_wr_own_conf(struct rockchip_pcie_port *pp,
> + int where, int size, u32 val)
> +{
> + u32 tmp;
> + int offset;
> +
> + offset = (where & (~0x3));
> + tmp = readl(pp->apb_base + PCIE_RC_CONFIG_BASE + offset);
> + if (size == 4) {
> + writel(val, pp->apb_base + PCIE_RC_CONFIG_BASE + where);
> + } else if (size == 2) {
> + if (where & 0x2)
> + tmp = ((tmp & 0xffff) | (val << 16));
> + else
> + tmp = ((tmp & 0xffff0000) | val);
> +
> + writel(tmp, pp->apb_base + PCIE_RC_CONFIG_BASE + offset);
> + } else if (size == 1) {
> + if ((where & 0x3) == 0)
> + tmp = ((tmp & (~0xff)) | val);
> + else if ((where & 0x3) == 1)
> + tmp = ((tmp & (~0xff00)) | (val << 8));
> + else if ((where & 0x3) == 2)
> + tmp = ((tmp & (~0xff0000)) | (val << 16));
> + else if ((where & 0x3) == 3)
> + tmp = ((tmp & (~0xff000000)) | (val << 24));
> +
> + writel(tmp, pp->apb_base + PCIE_RC_CONFIG_BASE + offset);
> + } else {
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> + }
> + return PCIBIOS_SUCCESSFUL;
> +}
Why can't you access the individual sub-word registers here?
> +
> +static int rockchip_pcie_rd_other_conf(struct rockchip_pcie_port *pp,
> + struct pci_bus *bus, u32 devfn,
> + int where, int size, u32 *val)
> +{
> + u32 busdev;
> +
> + busdev = PCIE_ECAM_ADDR(bus->number, PCI_SLOT(devfn),
> + PCI_FUNC(devfn), where);
> +
> + if (busdev & (size - 1)) {
> + *val = 0;
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> + }
> +
> + if (size == 4) {
> + *val = readl(pp->reg_base + busdev);
> + } else if (size == 2) {
> + *val = readw(pp->reg_base + busdev);
> + } else if (size == 1) {
> + *val = readb(pp->reg_base + busdev);
> + } else {
> + *val = 0;
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> + }
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
This looks like the normal ECAM operations, you could just call those.
> + while (time_before(jiffies, timeout)) {
> + regmap_read(port->grf, port->pcie_status, &status);
> + if ((status & (1 << 9))) {
> + dev_info(port->dev, "pll locked!\n");
> + err = 0;
> + break;
> + }
> + }
Maybe add an msleep(1) here to avoid busy-looping?
> + for (reg_no = 0; reg_no < (port->mem_size >> 20); reg_no++) {
> + err = rockchip_pcie_prog_ob_atu(port, reg_no + 1,
> + AXI_WRAPPER_MEM_WRITE,
> + 20 - 1,
> + port->mem_bus_addr +
> + (reg_no << 20),
> + 0);
> + if (err) {
> + dev_err(dev, "Program RC outbound atu failed\n");
> + return err;
> + }
> + }
What if there is more than one outbound memory window, e.g. prefetchable
and non-prefetchable?
Where do you set the I/O window?
> + err = rockchip_pcie_prog_ib_atu(port, 2, 32 - 1, 0x0, 0);
> + if (err) {
> + dev_err(dev, "Program RC inbound atu failed\n");
> + return err;
> + }
And this doesn't seem to reflect the DMA ranges.
> +
> + port->root_bus_nr = port->busn->start;
> + if (IS_ENABLED(CONFIG_PCI_MSI)) {
> + bus = pci_scan_root_bus_msi(port->dev, port->root_bus_nr,
> + &rockchip_pcie_ops, port, &res,
> + port->msi);
> + } else {
> + bus = pci_scan_root_bus(&pdev->dev, 0,
> + &rockchip_pcie_ops, port, &res);
PCI_MSI is selected unconditionally from Kconfig for this driver, so no
need for the compile-time check here.
> +
> +static int rockchip_pcie_remove(struct platform_device *pdev)
> +{
> + struct rockchip_pcie_port *port = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(port->hclk_pcie);
> + clk_disable_unprepare(port->aclk_perf_pcie);
> + clk_disable_unprepare(port->aclk_pcie);
> + clk_disable_unprepare(port->clk_pciephy_ref);
> +
> + return 0;
> +}
You don't seem to remove the child devices here. Have you tried unloading the module?
Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
