On 05/09/2016 11:02 AM, Lee Jones wrote:
On Fri, 22 Apr 2016, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Add support for the Altera Arria10 Development Kit System Resource
chip which is implemented using a MAX5 as a external gpio extender,
and power supply alarm (hwmon) with the regmap framework over a SPI bus.
Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/mfd/Kconfig | 11 +++
drivers/mfd/Makefile | 2 +
drivers/mfd/altera-a10sr.c | 179 ++++++++++++++++++++++++++++++++++++++
include/linux/mfd/altera-a10sr.h | 87 ++++++++++++++++++
4 files changed, 279 insertions(+)
create mode 100644 drivers/mfd/altera-a10sr.c
create mode 100644 include/linux/mfd/altera-a10sr.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index eea61e3..4fc27c6 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -18,6 +18,17 @@ config MFD_CS5535
This is the core driver for CS5535/CS5536 MFD functions. This is
necessary for using the board's GPIO and MFGPT functionality.
+config MFD_ALTERA_A10SR
+ bool "Altera Arria10 DevKit System Resource chip"
+ depends on ARCH_SOCFPGA && SPI_MASTER=y && OF
+ select REGMAP_SPI
+ select MFD_CORE
+ help
+ Support for the Altera Arria10 DevKit MAX5 System Resource chip
+ using the SPI interface. This driver provides common support for
+ accessing the external gpio extender (LEDs & buttons) and
+ power supply alarms (hwmon).
+
config MFD_ACT8945A
tristate "Active-semi ACT8945A"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 5eaa6465d..4f1ff91 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -203,3 +203,5 @@ intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
+
+obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
diff --git a/drivers/mfd/altera-a10sr.c b/drivers/mfd/altera-a10sr.c
new file mode 100644
index 0000000..2ff08e3
--- /dev/null
+++ b/drivers/mfd/altera-a10sr.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright Altera Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * SPI access for Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from DA9052
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ * Author: David Dajun Chen <dchen@xxxxxxxxxxx>
You don't need to carry the copyright or authorship tags over.
OK. Thanks,
+ */
+
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+
+static const struct mfd_cell altr_a10sr_subdev_info[] = {
+ {
+ .name = "altr_a10sr_gpio",
+ .of_compatible = "altr,a10sr-gpio",
+ },
+};
+
+static bool altr_a10sr_reg_readable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ALTR_A10SR_VERSION_READ:
+ case ALTR_A10SR_LED_REG:
+ case ALTR_A10SR_PBDSW_REG:
+ case ALTR_A10SR_PBDSW_IRQ_REG:
+ case ALTR_A10SR_PWR_GOOD1_REG:
+ case ALTR_A10SR_PWR_GOOD2_REG:
+ case ALTR_A10SR_PWR_GOOD3_REG:
+ case ALTR_A10SR_FMCAB_REG:
+ case ALTR_A10SR_HPS_RST_REG:
+ case ALTR_A10SR_USB_QSPI_REG:
+ case ALTR_A10SR_SFPA_REG:
+ case ALTR_A10SR_SFPB_REG:
+ case ALTR_A10SR_I2C_M_REG:
+ case ALTR_A10SR_WARM_RST_REG:
+ case ALTR_A10SR_WR_KEY_REG:
+ case ALTR_A10SR_PMBUS_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool altr_a10sr_reg_writeable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ALTR_A10SR_LED_REG:
+ case ALTR_A10SR_PBDSW_IRQ_REG:
+ case ALTR_A10SR_FMCAB_REG:
+ case ALTR_A10SR_HPS_RST_REG:
+ case ALTR_A10SR_USB_QSPI_REG:
+ case ALTR_A10SR_SFPA_REG:
+ case ALTR_A10SR_SFPB_REG:
+ case ALTR_A10SR_WARM_RST_REG:
+ case ALTR_A10SR_WR_KEY_REG:
+ case ALTR_A10SR_PMBUS_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool altr_a10sr_reg_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ALTR_A10SR_PBDSW_REG:
+ case ALTR_A10SR_PBDSW_IRQ_REG:
+ case ALTR_A10SR_PWR_GOOD1_REG:
+ case ALTR_A10SR_PWR_GOOD2_REG:
+ case ALTR_A10SR_PWR_GOOD3_REG:
+ case ALTR_A10SR_HPS_RST_REG:
+ case ALTR_A10SR_I2C_M_REG:
+ case ALTR_A10SR_WARM_RST_REG:
+ case ALTR_A10SR_WR_KEY_REG:
+ case ALTR_A10SR_PMBUS_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+const struct regmap_config altr_a10sr_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .cache_type = REGCACHE_NONE,
+
+ .use_single_rw = true,
+ .read_flag_mask = 1,
+ .write_flag_mask = 0,
+
+ .max_register = ALTR_A10SR_WR_KEY_REG,
+ .readable_reg = altr_a10sr_reg_readable,
+ .writeable_reg = altr_a10sr_reg_writeable,
+ .volatile_reg = altr_a10sr_reg_volatile,
+
+};
+
+static int altr_a10sr_spi_probe(struct spi_device *spi)
+{
+ int ret;
+ struct altr_a10sr *a10sr;
+
+ a10sr = devm_kzalloc(&spi->dev, sizeof(*a10sr),
+ GFP_KERNEL);
+ if (!a10sr)
+ return -ENOMEM;
+
+ spi->mode = SPI_MODE_3;
+ spi->bits_per_word = 8;
+ spi_setup(spi);
+
+ a10sr->dev = &spi->dev;
+
+ spi_set_drvdata(spi, a10sr);
+
+ a10sr->regmap = devm_regmap_init_spi(spi, &altr_a10sr_regmap_config);
+ if (IS_ERR(a10sr->regmap)) {
+ ret = PTR_ERR(a10sr->regmap);
+ dev_err(&spi->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
Is this regmap used it more than one driver?
Yes, Currently, both the subdevices (GPIO & HWMON) use this regmap to
communicate to the SPI registers.
+ ret = mfd_add_devices(a10sr->dev, PLATFORM_DEVID_AUTO,
+ altr_a10sr_subdev_info,
+ ARRAY_SIZE(altr_a10sr_subdev_info),
+ NULL, 0, NULL);
+ if (ret)
+ dev_err(a10sr->dev, "Failed to register sub-devices: %d\n",
+ ret);
+
+ return ret;
+}
+
+static int altr_a10sr_spi_remove(struct spi_device *spi)
+{
+ mfd_remove_devices(&spi->dev);
+
+ return 0;
+}
Use devm_mfd_add_devices() and remove this function.
OK.
+static const struct of_device_id altr_a10sr_spi_of_match[] = {
+ { .compatible = "altr,a10sr" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, altr_a10sr_spi_of_match);
+
+static struct spi_driver altr_a10sr_spi_driver = {
+ .probe = altr_a10sr_spi_probe,
+ .remove = altr_a10sr_spi_remove,
Remove .remove.
+ .driver = {
+ .name = "altr_a10sr",
+ .of_match_table = of_match_ptr(altr_a10sr_spi_of_match),
+ },
+};
+
+module_spi_driver(altr_a10sr_spi_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Altera Arria10 DevKit System Resource MFD Driver");
diff --git a/include/linux/mfd/altera-a10sr.h b/include/linux/mfd/altera-a10sr.h
new file mode 100644
index 0000000..c869fe7
--- /dev/null
+++ b/include/linux/mfd/altera-a10sr.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright Altera Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Declarations for Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from DA9052
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ * Author: David Dajun Chen <dchen@xxxxxxxxxxx>
Remove these two lines.
Will do. Thanks for reviewing!
+ */
+
+#ifndef __MFD_ALTERA_A10SR_H
+#define __MFD_ALTERA_A10SR_H
+
+#include <linux/completion.h>
+#include <linux/list.h>
+#include <linux/mfd/core.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* Write registers are always on even addresses */
+#define WRITE_REG_MASK 0xFE
+/* Odd registers are always on odd addresses */
+#define READ_REG_MASK 0x01
+
+#define ALTR_A10SR_BITS_PER_REGISTER 8
+/*
+ * To find the correct register, we divide the input GPIO by
+ * the number of GPIO in each register. We then need to multiply
+ * by 2 because the reads are at odd addresses.
+ */
+#define ALTR_A10SR_REG_OFFSET(X) (((X) / ALTR_A10SR_BITS_PER_REGISTER) << 1)
+#define ALTR_A10SR_REG_BIT(X) ((X) % ALTR_A10SR_BITS_PER_REGISTER)
+#define ALTR_A10SR_REG_BIT_CHG(X, Y) ((X) << ALTR_A10SR_REG_BIT(Y))
+#define ALTR_A10SR_REG_BIT_MASK(X) (1 << ALTR_A10SR_REG_BIT(X))
+
+/* Arria10 System Controller Register Defines */
+#define ALTR_A10SR_NOP 0x00 /* No Change */
+#define ALTR_A10SR_VERSION_READ 0x00 /* MAX5 Version Read */
+
+#define ALTR_A10SR_LED_REG 0x02 /* LED - Upper 4 bits */
+/* LED register Bit Definitions */
+#define ALTR_A10SR_LED_VALID_SHIFT 4 /* LED - Upper 4 bits valid */
+#define ALTR_A10SR_OUT_VALID_RANGE_LO ALTR_A10SR_LED_VALID_SHIFT
+#define ALTR_A10SR_OUT_VALID_RANGE_HI 7
+
+#define ALTR_A10SR_PBDSW_REG 0x04 /* PB & DIP SW - Input only */
+#define ALTR_A10SR_PBDSW_IRQ_REG 0x06 /* PB & DIP SW Flag Clear */
+/* Pushbutton & DIP Switch Bit Definitions */
+#define ALTR_A10SR_IN_VALID_RANGE_LO 8
+#define ALTR_A10SR_IN_VALID_RANGE_HI 15
+
+#define ALTR_A10SR_PWR_GOOD1_REG 0x08 /* Power Good1 Read */
+#define ALTR_A10SR_PWR_GOOD2_REG 0x0A /* Power Good2 Read */
+#define ALTR_A10SR_PWR_GOOD3_REG 0x0C /* Power Good3 Read */
+#define ALTR_A10SR_FMCAB_REG 0x0E /* FMCA/B & PCIe Pwr Enable */
+#define ALTR_A10SR_HPS_RST_REG 0x10 /* HPS Reset */
+#define ALTR_A10SR_USB_QSPI_REG 0x12 /* USB, BQSPI, FILE Reset */
+#define ALTR_A10SR_SFPA_REG 0x14 /* SFPA Control Reg */
+#define ALTR_A10SR_SFPB_REG 0x16 /* SFPB Control Reg */
+#define ALTR_A10SR_I2C_M_REG 0x18 /* I2C Master Select */
+#define ALTR_A10SR_WARM_RST_REG 0x1A /* HPS Warm Reset */
+#define ALTR_A10SR_WR_KEY_REG 0x1C /* HPS Warm Reset Key */
+#define ALTR_A10SR_PMBUS_REG 0x1E /* HPS PM Bus */
+
+/**
+ * struct altr_a10sr - Altera Max5 MFD device private data structure
+ * @dev: : this device
+ * @regmap: the regmap assigned to the parent device.
+ */
+struct altr_a10sr {
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+#endif /* __MFD_ALTERA_A10SR_H */
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html