On Fri, May 6, 2016 at 1:19 PM, Michael Haas <haas@xxxxxxxxxxxxxxxxxxxx> wrote: > This adds a driver for the ac power_supply bits of the axp20x > PMICs. > > This submission is taken directly from Bruno Prémonts 2015 RFC [0]. > The original RFC contains drivers for AC, battery and backup > battery. This commit only adds the AC driver for now. > > [0] http://permalink.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/17980 > > Signed-off-by: Michael Haas <haas@xxxxxxxxxxxxxxxxxxxx> > --- > drivers/power/Makefile | 2 +- > drivers/power/axp20x_ac_power.c | 181 ++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 182 insertions(+), 1 deletion(-) > create mode 100644 drivers/power/axp20x_ac_power.c > > diff --git a/drivers/power/Makefile b/drivers/power/Makefile > index e46b75d..3a785cc 100644 > --- a/drivers/power/Makefile > +++ b/drivers/power/Makefile > @@ -9,7 +9,7 @@ obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o > > obj-$(CONFIG_PDA_POWER) += pda_power.o > obj-$(CONFIG_APM_POWER) += apm_power.o > -obj-$(CONFIG_AXP20X_POWER) += axp20x_usb_power.o > +obj-$(CONFIG_AXP20X_POWER) += axp20x_usb_power.o axp20x_ac_power.o Sort the file names please. > obj-$(CONFIG_MAX8925_POWER) += max8925_power.o > obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o > obj-$(CONFIG_WM831X_POWER) += wm831x_power.o > diff --git a/drivers/power/axp20x_ac_power.c b/drivers/power/axp20x_ac_power.c > new file mode 100644 > index 0000000..0d1ca0e > --- /dev/null > +++ b/drivers/power/axp20x_ac_power.c > @@ -0,0 +1,181 @@ > +/* > + * AXP20x PMIC AC power driver > + * > + * Copyright 2014-2015 Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + */ > + > +#include <linux/err.h> > +#include <linux/interrupt.h> > +#include <linux/irq.h> > +#include <linux/mfd/axp20x.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/power_supply.h> > +#include <linux/regmap.h> > +#include <linux/slab.h> > + > +#define DRVNAME "axp20x-ac-power" > + > + > +/* Fields of AXP20X_PWR_INPUT_STATUS */ > +#define AXP20X_PWR_STATUS_AC_PRESENT BIT(7) > +#define AXP20X_PWR_STATUS_AC_AVAILABLE BIT(6) > +#define AXP20X_PWR_STATUS_AC_VBUS_SHORT BIT(1) > +#define AXP20X_PWR_STATUS_AC_VBUS_SEL BIT(0) These 2 aren't used anymore. Please remove them. > + > +/* Fields of AXP20X_ADC_EN1 */ > +#define AXP20X_ADC_EN1_ACIN_VOLT BIT(5) > +#define AXP20X_ADC_EN1_ACIN_CURR BIT(4) > + > + > +struct axp20x_ac_power { > + struct regmap *regmap; > + struct power_supply *supply; > +}; > + > +static int axp20x_ac_power_get_property(struct power_supply *psy, > + enum power_supply_property psp, > + union power_supply_propval *val) > +{ > + struct axp20x_ac_power *power = power_supply_get_drvdata(psy); > + unsigned int input; > + int r; > + > + switch (psp) { > + case POWER_SUPPLY_PROP_VOLTAGE_NOW: > + r = axp20x_read_variable_width(power->regmap, > + AXP20X_ACIN_V_ADC_H, 12); > + if (r < 0) > + return r; > + > + val->intval = r * 1700; /* 1 step = 1.7 mV */ > + return 0; > + case POWER_SUPPLY_PROP_CURRENT_NOW: > + r = axp20x_read_variable_width(power->regmap, > + AXP20X_ACIN_I_ADC_H, 12); > + if (r < 0) > + return r; > + > + val->intval = r * 375; /* 1 step = 0.375 mA */ The step for ACIN is 0.625 mA. 0.375 is for VBUS. > + return 0; > + default: > + break; > + } > + > + /* All the properties below need the input-status reg value */ > + r = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &input); > + if (r) > + return r; > + > + switch (psp) { > + case POWER_SUPPLY_PROP_PRESENT: > + val->intval = !!(input & AXP20X_PWR_STATUS_AC_PRESENT); > + break; > + case POWER_SUPPLY_PROP_ONLINE: > + val->intval = !!(input & AXP20X_PWR_STATUS_AC_AVAILABLE); > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static enum power_supply_property axp20x_ac_power_properties[] = { > + POWER_SUPPLY_PROP_PRESENT, > + POWER_SUPPLY_PROP_ONLINE, > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > + POWER_SUPPLY_PROP_CURRENT_NOW, > +}; > + > +static const struct power_supply_desc axp20x_ac_power_desc = { > + .name = "axp20x-ac", > + .type = POWER_SUPPLY_TYPE_MAINS, > + .properties = axp20x_ac_power_properties, > + .num_properties = ARRAY_SIZE(axp20x_ac_power_properties), > + .get_property = axp20x_ac_power_get_property, > +}; > + > +static irqreturn_t axp20x_irq_ac_handler(int irq, void *devid) > +{ > + struct axp20x_ac_power *power = devid; > + > + power_supply_changed(power->supply); > + > + return IRQ_HANDLED; > +} > + > +static int axp20x_ac_power_probe(struct platform_device *pdev) > +{ > + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); > + struct power_supply_config psy_cfg = {}; > + struct axp20x_ac_power *power; > + static const char * const irq_names[] = { "ACIN_PLUGIN", > + "ACIN_REMOVAL", "ACIN_OVER_V" }; > + int i, irq, r; > + > + power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL); > + if (!power) > + return -ENOMEM; > + > + power->regmap = axp20x->regmap; > + > + /* Enable ac voltage and current measurement */ > + r = regmap_update_bits(power->regmap, AXP20X_ADC_EN1, > + AXP20X_ADC_EN1_ACIN_CURR | AXP20X_ADC_EN1_ACIN_VOLT, > + AXP20X_ADC_EN1_ACIN_CURR | AXP20X_ADC_EN1_ACIN_VOLT); > + if (r) > + return r; > + > + psy_cfg.of_node = pdev->dev.of_node; > + psy_cfg.drv_data = power; > + > + power->supply = devm_power_supply_register(&pdev->dev, > + &axp20x_ac_power_desc, &psy_cfg); > + if (IS_ERR(power->supply)) > + return PTR_ERR(power->supply); > + > + /* Request irqs after registering, as irqs may trigger immediately */ > + for (i = 0; i < ARRAY_SIZE(irq_names); i++) { > + irq = platform_get_irq_byname(pdev, irq_names[i]); > + if (irq < 0) { > + dev_warn(&pdev->dev, "No IRQ for %s: %d\n", > + irq_names[i], irq); > + continue; > + } > + irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq); > + r = devm_request_any_context_irq(&pdev->dev, irq, > + axp20x_irq_ac_handler, 0, DRVNAME, power); > + if (r < 0) > + dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n", > + irq_names[i], r); Won't missing IRQs hinder the usage of this driver / hardware? A power supply isn't much use if the system isn't told when it's gone. Regards ChenYu > + } > + > + return 0; > +} > + > +static const struct of_device_id axp20x_ac_power_match[] = { > + { .compatible = "x-powers,axp202-ac-power-supply" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, axp20x_ac_power_match); > + > +static struct platform_driver axp20x_ac_power_driver = { > + .probe = axp20x_ac_power_probe, > + .driver = { > + .name = DRVNAME, > + .of_match_table = axp20x_ac_power_match, > + }, > +}; > + > +module_platform_driver(axp20x_ac_power_driver); > + > +MODULE_AUTHOR("Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>"); > +MODULE_DESCRIPTION("AXP20x PMIC AC power supply status driver"); > +MODULE_LICENSE("GPL"); > -- > 2.8.2 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html