On Fri, 22 Apr 2016, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote: > From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx> > > Add support for the Altera Arria10 Development Kit System Resource > chip which is implemented using a MAX5 as a external gpio extender, > and power supply alarm (hwmon) with the regmap framework over a SPI bus. > > Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx> > --- > drivers/mfd/Kconfig | 11 +++ > drivers/mfd/Makefile | 2 + > drivers/mfd/altera-a10sr.c | 179 ++++++++++++++++++++++++++++++++++++++ > include/linux/mfd/altera-a10sr.h | 87 ++++++++++++++++++ > 4 files changed, 279 insertions(+) > create mode 100644 drivers/mfd/altera-a10sr.c > create mode 100644 include/linux/mfd/altera-a10sr.h > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index eea61e3..4fc27c6 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -18,6 +18,17 @@ config MFD_CS5535 > This is the core driver for CS5535/CS5536 MFD functions. This is > necessary for using the board's GPIO and MFGPT functionality. > > +config MFD_ALTERA_A10SR > + bool "Altera Arria10 DevKit System Resource chip" > + depends on ARCH_SOCFPGA && SPI_MASTER=y && OF > + select REGMAP_SPI > + select MFD_CORE > + help > + Support for the Altera Arria10 DevKit MAX5 System Resource chip > + using the SPI interface. This driver provides common support for > + accessing the external gpio extender (LEDs & buttons) and > + power supply alarms (hwmon). > + > config MFD_ACT8945A > tristate "Active-semi ACT8945A" > select MFD_CORE > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 5eaa6465d..4f1ff91 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -203,3 +203,5 @@ intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o > intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o > obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o > obj-$(CONFIG_MFD_MT6397) += mt6397-core.o > + > +obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o > diff --git a/drivers/mfd/altera-a10sr.c b/drivers/mfd/altera-a10sr.c > new file mode 100644 > index 0000000..2ff08e3 > --- /dev/null > +++ b/drivers/mfd/altera-a10sr.c > @@ -0,0 +1,179 @@ > +/* > + * Copyright Altera Corporation (C) 2014-2016. All Rights Reserved > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + * > + * SPI access for Altera Arria10 MAX5 System Resource Chip > + * > + * Adapted from DA9052 > + * Copyright(c) 2011 Dialog Semiconductor Ltd. > + * Author: David Dajun Chen <dchen@xxxxxxxxxxx> You don't need to carry the copyright or authorship tags over. > + */ > + > +#include <linux/mfd/altera-a10sr.h> > +#include <linux/mfd/core.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/spi/spi.h> > + > +static const struct mfd_cell altr_a10sr_subdev_info[] = { > + { > + .name = "altr_a10sr_gpio", > + .of_compatible = "altr,a10sr-gpio", > + }, > +}; > + > +static bool altr_a10sr_reg_readable(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case ALTR_A10SR_VERSION_READ: > + case ALTR_A10SR_LED_REG: > + case ALTR_A10SR_PBDSW_REG: > + case ALTR_A10SR_PBDSW_IRQ_REG: > + case ALTR_A10SR_PWR_GOOD1_REG: > + case ALTR_A10SR_PWR_GOOD2_REG: > + case ALTR_A10SR_PWR_GOOD3_REG: > + case ALTR_A10SR_FMCAB_REG: > + case ALTR_A10SR_HPS_RST_REG: > + case ALTR_A10SR_USB_QSPI_REG: > + case ALTR_A10SR_SFPA_REG: > + case ALTR_A10SR_SFPB_REG: > + case ALTR_A10SR_I2C_M_REG: > + case ALTR_A10SR_WARM_RST_REG: > + case ALTR_A10SR_WR_KEY_REG: > + case ALTR_A10SR_PMBUS_REG: > + return true; > + default: > + return false; > + } > +} > + > +static bool altr_a10sr_reg_writeable(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case ALTR_A10SR_LED_REG: > + case ALTR_A10SR_PBDSW_IRQ_REG: > + case ALTR_A10SR_FMCAB_REG: > + case ALTR_A10SR_HPS_RST_REG: > + case ALTR_A10SR_USB_QSPI_REG: > + case ALTR_A10SR_SFPA_REG: > + case ALTR_A10SR_SFPB_REG: > + case ALTR_A10SR_WARM_RST_REG: > + case ALTR_A10SR_WR_KEY_REG: > + case ALTR_A10SR_PMBUS_REG: > + return true; > + default: > + return false; > + } > +} > + > +static bool altr_a10sr_reg_volatile(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case ALTR_A10SR_PBDSW_REG: > + case ALTR_A10SR_PBDSW_IRQ_REG: > + case ALTR_A10SR_PWR_GOOD1_REG: > + case ALTR_A10SR_PWR_GOOD2_REG: > + case ALTR_A10SR_PWR_GOOD3_REG: > + case ALTR_A10SR_HPS_RST_REG: > + case ALTR_A10SR_I2C_M_REG: > + case ALTR_A10SR_WARM_RST_REG: > + case ALTR_A10SR_WR_KEY_REG: > + case ALTR_A10SR_PMBUS_REG: > + return true; > + default: > + return false; > + } > +} > + > +const struct regmap_config altr_a10sr_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + > + .cache_type = REGCACHE_NONE, > + > + .use_single_rw = true, > + .read_flag_mask = 1, > + .write_flag_mask = 0, > + > + .max_register = ALTR_A10SR_WR_KEY_REG, > + .readable_reg = altr_a10sr_reg_readable, > + .writeable_reg = altr_a10sr_reg_writeable, > + .volatile_reg = altr_a10sr_reg_volatile, > + > +}; > + > +static int altr_a10sr_spi_probe(struct spi_device *spi) > +{ > + int ret; > + struct altr_a10sr *a10sr; > + > + a10sr = devm_kzalloc(&spi->dev, sizeof(*a10sr), > + GFP_KERNEL); > + if (!a10sr) > + return -ENOMEM; > + > + spi->mode = SPI_MODE_3; > + spi->bits_per_word = 8; > + spi_setup(spi); > + > + a10sr->dev = &spi->dev; > + > + spi_set_drvdata(spi, a10sr); > + > + a10sr->regmap = devm_regmap_init_spi(spi, &altr_a10sr_regmap_config); > + if (IS_ERR(a10sr->regmap)) { > + ret = PTR_ERR(a10sr->regmap); > + dev_err(&spi->dev, "Failed to allocate register map: %d\n", > + ret); > + return ret; > + } Is this regmap used it more than one driver? > + ret = mfd_add_devices(a10sr->dev, PLATFORM_DEVID_AUTO, > + altr_a10sr_subdev_info, > + ARRAY_SIZE(altr_a10sr_subdev_info), > + NULL, 0, NULL); > + if (ret) > + dev_err(a10sr->dev, "Failed to register sub-devices: %d\n", > + ret); > + > + return ret; > +} > + > +static int altr_a10sr_spi_remove(struct spi_device *spi) > +{ > + mfd_remove_devices(&spi->dev); > + > + return 0; > +} Use devm_mfd_add_devices() and remove this function. > +static const struct of_device_id altr_a10sr_spi_of_match[] = { > + { .compatible = "altr,a10sr" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, altr_a10sr_spi_of_match); > + > +static struct spi_driver altr_a10sr_spi_driver = { > + .probe = altr_a10sr_spi_probe, > + .remove = altr_a10sr_spi_remove, Remove .remove. > + .driver = { > + .name = "altr_a10sr", > + .of_match_table = of_match_ptr(altr_a10sr_spi_of_match), > + }, > +}; > + > +module_spi_driver(altr_a10sr_spi_driver); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR("Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>"); > +MODULE_DESCRIPTION("Altera Arria10 DevKit System Resource MFD Driver"); > diff --git a/include/linux/mfd/altera-a10sr.h b/include/linux/mfd/altera-a10sr.h > new file mode 100644 > index 0000000..c869fe7 > --- /dev/null > +++ b/include/linux/mfd/altera-a10sr.h > @@ -0,0 +1,87 @@ > +/* > + * Copyright Altera Corporation (C) 2014-2016. All Rights Reserved > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + * > + * Declarations for Altera Arria10 MAX5 System Resource Chip > + * > + * Adapted from DA9052 > + * Copyright(c) 2011 Dialog Semiconductor Ltd. > + * Author: David Dajun Chen <dchen@xxxxxxxxxxx> Remove these two lines. > + */ > + > +#ifndef __MFD_ALTERA_A10SR_H > +#define __MFD_ALTERA_A10SR_H > + > +#include <linux/completion.h> > +#include <linux/list.h> > +#include <linux/mfd/core.h> > +#include <linux/regmap.h> > +#include <linux/slab.h> > + > +/* Write registers are always on even addresses */ > +#define WRITE_REG_MASK 0xFE > +/* Odd registers are always on odd addresses */ > +#define READ_REG_MASK 0x01 > + > +#define ALTR_A10SR_BITS_PER_REGISTER 8 > +/* > + * To find the correct register, we divide the input GPIO by > + * the number of GPIO in each register. We then need to multiply > + * by 2 because the reads are at odd addresses. > + */ > +#define ALTR_A10SR_REG_OFFSET(X) (((X) / ALTR_A10SR_BITS_PER_REGISTER) << 1) > +#define ALTR_A10SR_REG_BIT(X) ((X) % ALTR_A10SR_BITS_PER_REGISTER) > +#define ALTR_A10SR_REG_BIT_CHG(X, Y) ((X) << ALTR_A10SR_REG_BIT(Y)) > +#define ALTR_A10SR_REG_BIT_MASK(X) (1 << ALTR_A10SR_REG_BIT(X)) > + > +/* Arria10 System Controller Register Defines */ > +#define ALTR_A10SR_NOP 0x00 /* No Change */ > +#define ALTR_A10SR_VERSION_READ 0x00 /* MAX5 Version Read */ > + > +#define ALTR_A10SR_LED_REG 0x02 /* LED - Upper 4 bits */ > +/* LED register Bit Definitions */ > +#define ALTR_A10SR_LED_VALID_SHIFT 4 /* LED - Upper 4 bits valid */ > +#define ALTR_A10SR_OUT_VALID_RANGE_LO ALTR_A10SR_LED_VALID_SHIFT > +#define ALTR_A10SR_OUT_VALID_RANGE_HI 7 > + > +#define ALTR_A10SR_PBDSW_REG 0x04 /* PB & DIP SW - Input only */ > +#define ALTR_A10SR_PBDSW_IRQ_REG 0x06 /* PB & DIP SW Flag Clear */ > +/* Pushbutton & DIP Switch Bit Definitions */ > +#define ALTR_A10SR_IN_VALID_RANGE_LO 8 > +#define ALTR_A10SR_IN_VALID_RANGE_HI 15 > + > +#define ALTR_A10SR_PWR_GOOD1_REG 0x08 /* Power Good1 Read */ > +#define ALTR_A10SR_PWR_GOOD2_REG 0x0A /* Power Good2 Read */ > +#define ALTR_A10SR_PWR_GOOD3_REG 0x0C /* Power Good3 Read */ > +#define ALTR_A10SR_FMCAB_REG 0x0E /* FMCA/B & PCIe Pwr Enable */ > +#define ALTR_A10SR_HPS_RST_REG 0x10 /* HPS Reset */ > +#define ALTR_A10SR_USB_QSPI_REG 0x12 /* USB, BQSPI, FILE Reset */ > +#define ALTR_A10SR_SFPA_REG 0x14 /* SFPA Control Reg */ > +#define ALTR_A10SR_SFPB_REG 0x16 /* SFPB Control Reg */ > +#define ALTR_A10SR_I2C_M_REG 0x18 /* I2C Master Select */ > +#define ALTR_A10SR_WARM_RST_REG 0x1A /* HPS Warm Reset */ > +#define ALTR_A10SR_WR_KEY_REG 0x1C /* HPS Warm Reset Key */ > +#define ALTR_A10SR_PMBUS_REG 0x1E /* HPS PM Bus */ > + > +/** > + * struct altr_a10sr - Altera Max5 MFD device private data structure > + * @dev: : this device > + * @regmap: the regmap assigned to the parent device. > + */ > +struct altr_a10sr { > + struct device *dev; > + struct regmap *regmap; > +}; > + > +#endif /* __MFD_ALTERA_A10SR_H */ -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
