From: Sylvain Lemieux <slemieux@xxxxxxxxxxx> This patchset change the following: 1) adds clock properties to spi peripheral devices, clock ids are taken from dt-bindings/clock/lpc32xx-clock.h. 2) enable SSP0 used by PHY3250. preparatory change prior to disabling SSPx controllers. 3) disable, by default, the SSP0/SPI1 and SSP1/SPI2 shared pinout; shared pin should be enable in board specific dts, as needed. --- Changes from v1 to v2: * Update the patch as per the feedback received from: Arnd: http://permalink.gmane.org/gmane.linux.ports.arm.kernel/493250 - Start subject with "ARM" instead of "arm". - Add a multi-line description for trivial patches. Vladimir: http://permalink.gmane.org/gmane.linux.ports.arm.kernel/493323 http://permalink.gmane.org/gmane.linux.ports.arm.kernel/493324 - Remove "clock-names" property. - Switch patch #2 and #3 order. * Rebased on the following patch: http://permalink.gmane.org/gmane.linux.drivers.devicetree/164584/ Sylvain Lemieux (3): ARM: dts: lpc32xx: add clock properties to spi nodes ARM: dts: phy3250: enable ssp0 ARM: dts: lpc32xx: disabled ssp0/spi1 & ssp1/spi2 by default arch/arm/boot/dts/lpc32xx.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/phy3250.dts | 1 + 2 files changed, 15 insertions(+) -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
