This patch updates the binding doc with clock description for vdma. Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx> --- Changes for v2: --> Listed down all the clocks supported by the h/w as suggested by the Datta. --> Used IP clock names instead of shortcut clock names. Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt index fcc2b65..afe9eb7 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt @@ -21,6 +21,11 @@ Required properties: - dma-channel child node: Should have at least one channel and can have up to two channels per device. This node specifies the properties of each DMA channel (see child node properties below). +- clocks: Input clock specifier. Refer to common clock bindings. +- clock-names: List of input clocks "s_axi_lite_aclk", "m_axi_mm2s_aclk" + "m_axi_s2mm_aclk", "m_axis_mm2s_aclk", "s_axis_s2mm_aclk" + (list of input cloks may vary based on the ip configuration. + see clock bindings for more info). Required properties for VDMA: - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. @@ -60,6 +65,9 @@ axi_vdma_0: axivdma@40030000 { xlnx,num-fstores = <0x8>; xlnx,flush-fsync = <0x1>; xlnx,addrwidth = <0x20>; + clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>; + clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk", + "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"; dma-channel@40030000 { compatible = "xlnx,axi-vdma-mm2s-channel"; interrupts = < 0 54 4 >; -- 2.1.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html