Some boards need different pin drive strength for the UHS mode. Add an
optional pinctrl setting with two pin states covering UHS speeds and
other speeds.
Signed-off-by: Lars Persson <larper@xxxxxxxx>
---
drivers/mmc/host/usdhi6rol0.c | 40 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 39 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c
index 2585ea4..e8a5c8f 100644
--- a/drivers/mmc/host/usdhi6rol0.c
+++ b/drivers/mmc/host/usdhi6rol0.c
@@ -22,6 +22,7 @@
#include <linux/mmc/sdio.h>
#include <linux/module.h>
#include <linux/pagemap.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
#include <linux/string.h>
@@ -198,6 +199,11 @@ struct usdhi6_host {
struct dma_chan *chan_rx;
struct dma_chan *chan_tx;
bool dma_active;
+
+ /* Pin control */
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_default;
+ struct pinctrl_state *pins_uhs;
};
/* I/O primitives */
@@ -1147,14 +1153,39 @@ static void usdhi6_enable_sdio_irq(struct mmc_host *mmc, int enable)
}
}
+static int usdhi6_set_pinstates(struct usdhi6_host *host, int voltage)
+{
+ if (IS_ERR(host->pinctrl) || IS_ERR(host->pins_default) ||
+ IS_ERR(host->pins_uhs))
+ return 0;
+
+ switch (voltage) {
+ case MMC_SIGNAL_VOLTAGE_180:
+ case MMC_SIGNAL_VOLTAGE_120:
+ return pinctrl_select_state(host->pinctrl,
+ host->pins_uhs);
+
+ default:
+ return pinctrl_select_state(host->pinctrl,
+ host->pins_default);
+ }
+}
+
static int usdhi6_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
{
int ret;
ret = mmc_regulator_set_vqmmc(mmc, ios);
- if (ret < 0)
+ if (ret < 0) {
dev_warn(mmc_dev(mmc), "Voltage switch failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = usdhi6_set_pinstates(mmc_priv(mmc), ios->signal_voltage);
+ if (ret)
+ dev_warn_once(mmc_dev(mmc),
+ "Failed to set pinstate err=%d\n", ret);
return ret;
}
@@ -1817,6 +1848,13 @@ static int usdhi6_probe(struct platform_device *pdev)
mmc->f_max = host->imclk;
mmc->f_min = host->imclk / 512;
+ host->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (!IS_ERR(host->pinctrl)) {
+ host->pins_default = pinctrl_lookup_state(host->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ host->pins_uhs = pinctrl_lookup_state(host->pinctrl,
+ "pins_uhs");
+ }
platform_set_drvdata(pdev, host);
ret = mmc_add_host(mmc);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
