On Wed, Apr 13, 2016 at 09:59:00AM +0200, Giuseppe CAVALLARO wrote:
> On 4/13/2016 8:15 AM, Mark Brown wrote:
> >>>+static void st_get_satinize_powerup_voltage(struct st_vsense *vsense)
> >>>+{
> >or am I missing something? Why do we need to do this anyway, it's very
> >surprsing?
> This functions is to sanitize the vsense voltages when the regulator
> is probed and in some circumstances the reset value of this register
> does not reflect the hw status/config. For example, by default, after
> the reset, the bit 0 is set so the EMMC, inside the flash subsystem,
> is supposed to operate at 3v3. But the latched bit 24 can be 0 on
> a platform where it is actually set at 1v8.
> So the bit 0 must be reset to keep this coherent and to allow MMC
> framework to properly setup the Vdd when the framework starts.
I'm afraid I can't follow that explanation, perhaps because I don't know
anything about the content of this register except for these three bits.
I think we do need a comment in the driver explaining what's going on,
and probably a simplification of the code too if my understanding of the
effect of all those operations is correct.
Attachment:
signature.asc
Description: PGP signature
