On Tue, Apr 12, 2016 at 04:16:41PM +0100, Peter Griffin wrote: > diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile > index 61bfbb9..10be29b 100644 > --- a/drivers/regulator/Makefile > +++ b/drivers/regulator/Makefile > @@ -108,6 +108,6 @@ obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o > obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o > obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o > obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o > - > +obj-$(CONFIG_REGULATOR_ST_FLASHSS) += st-flashss.o Please keep Kconfig and Makefile sorted. :/ > +static int st_set_voltage_sel(struct regulator_dev *dev, unsigned int selector) This and the get_voltage_sel() look like you can just use a MMIO regmap. > + voltage = st_type_voltages[selector]; No bounds checking on the array, though since you're working with selectors it doesn't seem like there's any need to do this. > + value |= vsense->en_psw_mask; Enable should be a separate operation. > +static void st_get_satinize_powerup_voltage(struct st_vsense *vsense) > +{ > + void __iomem *ioaddr = vsense->ioaddr; > + u32 value = readl_relaxed(ioaddr); > + > + dev_dbg(vsense->dev, "Initial start-up value: (0x%08x)\n", value); > + > + /* Sanitize voltage values forcing what is provided from start-up */ > + if (value & TOP_VSENSE_CONFIG_LATCHED_PSW_EMMC) > + value |= TOP_VSENSE_CONFIG_REG_PSW_EMMC; > + else > + value &= ~TOP_VSENSE_CONFIG_REG_PSW_EMMC; > + > + if (value & TOP_VSENSE_CONFIG_LATCHED_PSW_NAND) > + value |= TOP_VSENSE_CONFIG_REG_PSW_NAND; > + else > + value &= ~TOP_VSENSE_CONFIG_REG_PSW_NAND; > + > + if (value & TOP_VSENSE_CONFIG_LATCHED_PSW_SPI) > + value |= TOP_VSENSE_CONFIG_REG_PSW_SPI; > + else > + value &= ~TOP_VSENSE_CONFIG_REG_PSW_SPI; This looks like a very complicated way of writing value &= TOP_VSENSE_CONFIG_LATCHED_PSW_SPI | TOP_VSENSE_CONFIG_LATCHED_PSW_NAND | TOP_VSENSE_CONFIG_REG_PSW_EMMC or am I missing something? Why do we need to do this anyway, it's very surprsing? > + if (device->data) { > + const struct st_vsense *data = device->data; > + > + vsense->en_psw_mask = data->en_psw_mask; > + vsense->psw_mask = data->psw_mask; > + vsense->latched_mask = data->latched_mask; > + } else > + return -ENODEV; Coding style, { } on both sides. > + > + if (of_property_read_string(np, "regulator-name", > + (const char **)&vsense->name)) > + return -EINVAL; Don't make this mandatory, that's not what it's for. Use the compatible if you really need something, or just make the framework cope with a missing name (eg, by using dev_name() or something). > + config.init_data = of_get_regulator_init_data(&pdev->dev, np, rdesc); > + if (!config.init_data) { > + dev_err(dev, "Failed to parse regulator init data\n"); > + return -ENOMEM; > + } Don't error out, carry on and let the driver work in read only mode for diagnostics. > + /* register regulator */ > + rdev = regulator_register(rdesc, &config); devm_regulator_register(). > + dev_info(dev, "%s vsense voltage regulator registered\n", rdesc->name); Remove this, it's just making the boot noisy. > +static int __init st_vsense_init(void) > +{ > + return platform_driver_register(&st_vsense_driver); > +} > + > +subsys_initcall(st_vsense_init); module_platform_driver().
Attachment:
signature.asc
Description: PGP signature