On 04/01/2016 06:36 PM, Tony Lindgren wrote:
Hi,
* Tony Lindgren <tony@xxxxxxxxxxx> [160331 10:04]:
* Keerthy <a0393675@xxxxxx> [160331 02:26]:
On Thursday 31 March 2016 12:00 PM, Tero Kristo wrote:
On 03/31/2016 12:32 AM, Tony Lindgren wrote:
* Tony Lindgren <tony@xxxxxxxxxxx> [160330 14:19]:
* Keerthy <j-keerthy@xxxxxx> [160314 05:04]:
This is w.r.t J6/J6eco: 32clk is pseudo (erratum i856) - clock source.
Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz
external
crystal is not enabled at power up. Instead the CPU falls back to using
an emulation for the 32KHz clock which is SYSCLK1/610. SYSCLK1 is
usually
20MHz on boards so far (which gives an emulated frequency of 32.786KHz)
Thanks applying into omap-for-v4.6/fixes.
Actually let's wait a review from Tero on this one, not sure
about the pseudo clock naming here. So dropping for now.
The patch is fine for me, I didn't comment anything before as I thought
you already applied it.
Acked-by: Tero Kristo <t-kristo@xxxxxx>
Thanks Tero.
OK applying with Tero's ack.
I'm dropping this again as it introduces new warnings with make dtbs:
Warning (reg_format): "reg" property in /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck
Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck
DTC arch/arm/boot/dts/am57xx-cl-som-am57x.dtb
Warning (reg_format): "reg" property in /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck
Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck
DTC arch/arm/boot/dts/am57xx-sbc-am57x.dtb
Warning (reg_format): "reg" property in /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck
Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck
DTC arch/arm/boot/dts/dra7-evm.dtb
Warning (reg_format): "reg" property in /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck
Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck
DTC arch/arm/boot/dts/dra72-evm.dtb
Warning (reg_format): "reg" property in /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck
Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck
Regards,
Tony
Looks like a merge conflict to me, sys_32k_ck has gone under
clockdomains for some reason. It should be under clocks.
-Tero
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
