Hi, * Tony Lindgren <tony@xxxxxxxxxxx> [160331 10:04]: > * Keerthy <a0393675@xxxxxx> [160331 02:26]: > > > > > > On Thursday 31 March 2016 12:00 PM, Tero Kristo wrote: > > >On 03/31/2016 12:32 AM, Tony Lindgren wrote: > > >>* Tony Lindgren <tony@xxxxxxxxxxx> [160330 14:19]: > > >>>* Keerthy <j-keerthy@xxxxxx> [160314 05:04]: > > >>>>This is w.r.t J6/J6eco: 32clk is pseudo (erratum i856) - clock source. > > >>>>Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz > > >>>>external > > >>>>crystal is not enabled at power up. Instead the CPU falls back to using > > >>>>an emulation for the 32KHz clock which is SYSCLK1/610. SYSCLK1 is > > >>>>usually > > >>>>20MHz on boards so far (which gives an emulated frequency of 32.786KHz) > > >>> > > >>>Thanks applying into omap-for-v4.6/fixes. > > >> > > >>Actually let's wait a review from Tero on this one, not sure > > >>about the pseudo clock naming here. So dropping for now. > > > > > >The patch is fine for me, I didn't comment anything before as I thought > > >you already applied it. > > > > > >Acked-by: Tero Kristo <t-kristo@xxxxxx> > > > > Thanks Tero. > > OK applying with Tero's ack. I'm dropping this again as it introduces new warnings with make dtbs: Warning (reg_format): "reg" property in /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck DTC arch/arm/boot/dts/am57xx-cl-som-am57x.dtb Warning (reg_format): "reg" property in /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck DTC arch/arm/boot/dts/am57xx-sbc-am57x.dtb Warning (reg_format): "reg" property in /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck DTC arch/arm/boot/dts/dra7-evm.dtb Warning (reg_format): "reg" property in /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck DTC arch/arm/boot/dts/dra72-evm.dtb Warning (reg_format): "reg" property in /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4@4a000000/cm_core@8000/clockdomains/sys_32k_ck Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
