Hi On Wed, Mar 30, 2016 at 1:47 PM, Shawn Guo <shawnguo@xxxxxxxxxx> wrote: > On Sat, Feb 20, 2016 at 11:20:48AM +0100, Michael Trimarchi wrote: >> Thi patch series add the support for Engicam IMXUL product >> >> https://community.freescale.com/docs/DOC-328428 >> >> Based on Freescale™ i.MX 6UltraLite processor, a high performance, >> ultra-efficient processor family featuring an advanced implementation >> of a single ARM™ Cortex™-A7 core, which operates at speeds up to 528 MHz. >> >> The new ENGICAM GEA M6UL module is suitable for cost effective HMI >> applications requiring high performance CPU. >> >> Michael Trimarchi (4): >> ARM: dts: imx6ul: Add flexcan1 and flexcan2 support >> ARM: dts: imx6ul: Add LCDIF support >> ARM: dts: imx6ul: Add GPMI nand controller support >> ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support > > There are quite some changes around imx6ul.dtsi getting into 4.6-rc1. > Can you please rebase onto 4.6-rc1 and resend? > I will prepare tonight again, let test them tomorrow and send back tomorrow evening Michael > Shawn > >> >> arch/arm/boot/dts/Makefile | 3 +- >> arch/arm/boot/dts/imx6ul-geam-kit.dts | 102 +++++++++ >> arch/arm/boot/dts/imx6ul-geam.dtsi | 371 +++++++++++++++++++++++++++++++++ >> arch/arm/boot/dts/imx6ul.dtsi | 68 ++++++ >> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 10 + >> drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 +- >> 6 files changed, 557 insertions(+), 3 deletions(-) >> create mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts >> create mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsi >> >> -- >> 2.7.0 >> >> -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html