This patchset contains the pwm support for the Broadcom's iProc SoC's. The first patch provides the documentation details and the second patch contains the controller support details. The third patch contains the enable method for Northstar Plus SoC. This patch series has been tested on NSP bcm958625HR board with oscilloscope. The pwm is not enabled for this board as the pins are open and not used. This patch series is based on v4.6.0-rc1 and is available from github repo: https://github.com/Broadcom/cygnus-linux.git branch: iproc-pwm-v1 This patch series was originally sent on 03/01/16. See https://lkml.org/lkml/2016/3/1/487 Yendapally Reddy Dhananjaya Reddy (3): Documentation: dt: Add Broadcom iproc pwm controller binding pwm: kona: Add support for Broadcom iproc pwm controller ARM: dts: NSP: Add PWM Support to DT .../devicetree/bindings/pwm/brcm,kona-pwm.txt | 2 +- arch/arm/boot/dts/bcm-nsp.dtsi | 8 + drivers/pwm/Kconfig | 6 +- drivers/pwm/pwm-bcm-kona.c | 183 ++++++++++++++++++--- 4 files changed, 172 insertions(+), 27 deletions(-) -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html