Hi Thierry, Can you please provide review comments for this patch set. Thanks Dhananjay On Tue, Mar 29, 2016 at 7:52 PM, Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@xxxxxxxxxxxx> wrote: > This patchset contains the pwm support for the Broadcom's iProc SoC's. > > The first patch provides the documentation details and the > second patch contains the controller support details. The third patch > contains the enable method for Northstar Plus SoC. > > This patch series has been tested on NSP bcm958625HR board with oscilloscope. > The pwm is not enabled for this board as the pins are open and not used. > > This patch series is based on v4.6.0-rc1 and is available from github > repo: https://github.com/Broadcom/cygnus-linux.git > branch: iproc-pwm-v1 > > This patch series was originally sent on 03/01/16. > See https://lkml.org/lkml/2016/3/1/487 > > Yendapally Reddy Dhananjaya Reddy (3): > Documentation: dt: Add Broadcom iproc pwm controller binding > pwm: kona: Add support for Broadcom iproc pwm controller > ARM: dts: NSP: Add PWM Support to DT > > .../devicetree/bindings/pwm/brcm,kona-pwm.txt | 2 +- > arch/arm/boot/dts/bcm-nsp.dtsi | 8 + > drivers/pwm/Kconfig | 6 +- > drivers/pwm/pwm-bcm-kona.c | 183 ++++++++++++++++++--- > 4 files changed, 172 insertions(+), 27 deletions(-) > > -- > 2.1.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
