Device tree binding for new phy-da8xx-usb driver. Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx> --- v2 changes: This is new patch in v2. .../devicetree/bindings/phy/phy-da8xx-usb.txt | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt diff --git a/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt new file mode 100644 index 0000000..ed6b710 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt @@ -0,0 +1,34 @@ +TI DaVinci DA8XX USB PHY + +Required properties: + - compatible: must be "ti,da830-usbphy". + - #phy-cells: must be 1. + - reg : Address and length of the CFGCHIP2 register. + +This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG +controllers on DA8XX SoCs. Consumers of this device should use index 1 for +the USB 1.1 phy device and index 2 for the USB 2.0 phy device. + +Example: + + usbphy: usbphy@1c14184 { + compatible = "ti,da830-usbphy"; + #phy-cells = <1>; + reg = <0x14184 4>; + }; + + usb11: usb11@1e25000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usbphy 1>; + phy-names = "usbphy"; + }; + + usb20: usb@1e00000 { + compatible = "ti,da830-musb"; + reg = <0x200000 0x1000>; + interrupts = <58>; + phys = <&usbphy 2>; + phy-names = "usbphy"; + }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html