On 3/7/2016 4:46 PM, Andreas Färber wrote:
Hi Peppe,
Am 07.03.2016 um 16:09 schrieb Giuseppe CAVALLARO:
On 3/7/2016 3:27 PM, Andreas Färber wrote:
Indeed, reverting Gabriel's commit fixes the observed error messages
[...]
However, I am unable to ping any hosts on the network now.
hmm, this could be another problem. I wonder if you can
check which recent patch is introducing the problem on ARM64.
For example if this depends on Oct_2015 update.
I've had success reverting drivers/net/ethernet/stmicro/ up to and
including "stmmac: first frame prep at the end of xmit routine", i.e.
top 7 commits.
Andreas, I will check it and let you know asap.
http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/drivers/net/ethernet/stmicro?id=0e80bdc9a72df3b31a9fc2012102a6cc8d664e93
If you share some logs to me I can take a look at them.
Then we can try to check if the problem in on rx or tx path.
I also ask you yo check the axi settings.
On the reverted (good) branch I see in dmesg:
[ +0.001100] rk_gmac-dwmac ff290000.ethernet: Looking up phy-supply
from device tree
[ +0.000030] rk808 0-001b: Looking up vcc12-supply from device tree
[ +0.000013] vcc_lan: supplied by vcc_io
[ +0.000120] rk_gmac-dwmac ff290000.ethernet: clock input or output?
(input).
[ +0.000010] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30).
[ +0.000007] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10).
[ +0.000014] rk_gmac-dwmac ff290000.ethernet: init for RGMII
[ +0.000104] rk_gmac-dwmac ff290000.ethernet: clock input from PHY
[ +0.005099] rk_gmac-dwmac ff290000.ethernet: no reset control found
[ +0.000007] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ +0.000002] Ring mode enabled
[ +0.000006] DMA HW capability register supported
[ +0.000000] Normal descriptors
[ +0.000004] RX Checksum Offload Engine supported (type 2)
[ +0.000002] TX Checksum insertion supported
[ +0.000002] Wake-Up On Lan supported
[ +0.000052] Enable RX Mitigation via HW Watchdog Timer
[ +0.000683] rk_gmac-dwmac ff290000.ethernet eth0: No MDIO subnode found
[ +0.000124] of_get_named_gpiod_flags: can't parse 'snps,reset-gpio'
property of node '/ethernet@ff290000[0]'
[ +0.004219] libphy: stmmac: probed
[ +0.000010] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ +0.000005] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ +0.881011] eth0: device MAC address 4a:78:dd:10:b3:17
[ +4.003065] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up -
1Gbps/Full - flow control rx/tx
The MAC address is random, changing each time. Otherwise there's no log
difference I spot to the pre-Gabriel broken state.
ok
If you need more info, let me know where to find it.
no it's ok at this stage.
Thanks,
welcome
Andreas
Regards
peppe
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
