Re: [PATCH 2/2] mmc: dw_mmc: add resets support to dw_mci_parse_dt()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Guodong,

On 2016/3/3 9:33, Guodong Xu wrote:
With this, user can add a 'resets' property into dw_mmc dts
node, and when driver probe and parse_dt, it will call
reset APIs to reset dw_mmc host controller.

Please also refer to Documentation/devicetree/bindings/reset/reset.txt

I have no hard objection for this patch, but I'd rather not add it
unless we actually need it. Could you elaborate more about any futher
actions you will take if it's applied(i.e: deal with some unrecoverable
broken case)?  If we just reset the controller while probing, actually I
can't find any problems without it based on tons of my reboot test.



Signed-off-by: Guodong Xu <guodong.xu@xxxxxxxxxx>
Signed-off-by: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>
Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
---
  drivers/mmc/host/dw_mmc.c  | 7 +++++++
  include/linux/mmc/dw_mmc.h | 6 ++++--
  2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 242f9a0..d3a7376 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2878,6 +2878,13 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
  	if (!pdata)
  		return ERR_PTR(-ENOMEM);

+	/* find reset controller when exist */
+	pdata->rstc = devm_reset_control_get_optional(dev, NULL);
+	if (IS_ERR(pdata->rstc))
+		pdata->rstc = NULL;
+	else
+		reset_control_deassert(pdata->rstc);
+

if the PTR_ERR(pdata->rstc) is -EPROBE_DEFER, should we defer probing
the driver?

  	/* find out number of slots supported */
  	of_property_read_u32(np, "num-slots", &pdata->num_slots);

diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 7b41c6d..b95cd84 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -14,9 +14,10 @@
  #ifndef LINUX_MMC_DW_MMC_H
  #define LINUX_MMC_DW_MMC_H

-#include <linux/scatterlist.h>
-#include <linux/mmc/core.h>
  #include <linux/dmaengine.h>
+#include <linux/mmc/core.h>
+#include <linux/reset.h>
+#include <linux/scatterlist.h>

  #define MAX_MCI_SLOTS	2

@@ -260,6 +261,7 @@ struct dw_mci_board {
  	/* delay in mS before detecting cards after interrupt */
  	u32 detect_delay_ms;

+	struct reset_control *rstc;
  	struct dw_mci_dma_ops *dma_ops;
  	struct dma_pdata *data;
  };



--
Best Regards
Shawn Lin

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux