Add resets property to synopsys-dw-mshc bindings. It is intended to represent the hardware reset signal present internally in some host controller IC designs. See Documentation/devicetree/bindings/reset/reset.txt for details. Signed-off-by: Guodong Xu <guodong.xu@xxxxxxxxxx> --- Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 8636f5a..9b4896c 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -39,6 +39,10 @@ Required Properties: Optional properties: +* resets: phandle + reset specifier pair, intended to represent hardware + reset signal present internally in some host controller IC designs. + See Documentation/devicetree/bindings/reset/reset.txt for details. + * clocks: from common clock binding: handle to biu and ciu clocks for the bus interface unit clock and the card interface unit clock. @@ -48,7 +52,7 @@ Optional properties: clock-frequency. It is an error to omit both the ciu clock and the clock-frequency. -* clock-frequency: should be the frequency (in Hz) of the ciu clock. If this +* clock-frequency: should be tke frequency (in Hz) of the ciu clock. If this is specified and the ciu clock is specified then we'll try to set the ciu clock to this at probe time. -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
