R-Car H3 contains some hardware modules (e.g. VSP and FCP_V) that are not only located in a power area controlled by the SYSC system controller, but that are also part of the generic CPG/MSSR clock domain. Make sure both are handled by enabling module clock PM when the device for such a hardware module is attached to the SYSC PM Domain. FIXME Share code with the renesas-cpg-mssr driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- v2: - New. --- drivers/soc/renesas/pm-rcar.c | 68 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/drivers/soc/renesas/pm-rcar.c b/drivers/soc/renesas/pm-rcar.c index c0540934126e58eb..d1bf8c231540b11d 100644 --- a/drivers/soc/renesas/pm-rcar.c +++ b/drivers/soc/renesas/pm-rcar.c @@ -9,16 +9,20 @@ * for more details. */ +#include <linux/clk.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/mm.h> #include <linux/of_address.h> +#include <linux/pm_clock.h> #include <linux/pm_domain.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/io.h> #include <linux/soc/renesas/pm-rcar.h> +#include <dt-bindings/clock/renesas-cpg-mssr.h> + /* SYSC Common */ #define SYSCSR 0x00 /* SYSC Status Register */ #define SYSCISR 0x04 /* Interrupt Status Register */ @@ -248,11 +252,75 @@ static int rcar_pd_power_up(struct generic_pm_domain *genpd) return rcar_sysc_power_up(&to_rcar_pd(genpd)->ch); } +#ifdef CONFIG_ARCH_R8A7795 +static int rcar_clk_pd_attach_dev(struct generic_pm_domain *genpd, + struct device *dev) +{ + struct device_node *np = dev->of_node; + struct of_phandle_args clkspec; + struct clk *clk; + int i = 0; + int error; + + while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i, + &clkspec)) { + if (clkspec.args_count == 2 && clkspec.args[0] == CPG_MOD && + of_device_is_compatible(clkspec.np, + "renesas,r8a7795-cpg-mssr")) + goto found; + + of_node_put(clkspec.np); + i++; + } + + return 0; + +found: + clk = of_clk_get_from_provider(&clkspec); + of_node_put(clkspec.np); + + if (IS_ERR(clk)) + return PTR_ERR(clk); + + error = pm_clk_create(dev); + if (error) { + dev_err(dev, "pm_clk_create failed %d\n", error); + goto fail_put; + } + + error = pm_clk_add_clk(dev, clk); + if (error) { + dev_err(dev, "pm_clk_add_clk %pC failed %d\n", clk, error); + goto fail_destroy; + } + + return 0; + +fail_destroy: + pm_clk_destroy(dev); +fail_put: + clk_put(clk); + return error; +} + +static void rcar_clk_pd_detach_dev(struct generic_pm_domain *genpd, + struct device *dev) +{ + if (!list_empty(&dev->power.subsys_data->clock_list)) + pm_clk_destroy(dev); +} +#endif /* CONFIG_ARCH_R8A7795 */ + static void rcar_init_pm_domain(struct rcar_pm_domain *rcar_pd) { struct generic_pm_domain *genpd = &rcar_pd->genpd; struct dev_power_governor *gov = rcar_pd->gov; +#ifdef CONFIG_ARCH_R8A7795 + genpd->flags = GENPD_FLAG_PM_CLK; + genpd->attach_dev = rcar_clk_pd_attach_dev; + genpd->detach_dev = rcar_clk_pd_detach_dev; +#endif pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); genpd->dev_ops.active_wakeup = rcar_pd_active_wakeup; genpd->power_off = rcar_pd_power_down; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html