Re: [PATCH 5/5] ARM: dts: r8a7794 add sound support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello.

On 02/09/2016 10:50 PM, Simon Horman wrote:

Define the generic R8A7794 part of  the sound device node.
This sound device  is a complex one and comprises the Audio Clock Generator
(ADG), Sampling Rate Converter Unit (SCU), Serial Sound Interface [Unit]
(SSI[U]), and Audio DMAC-Peripheral-Peripheral.
It is up  to the board file to enable the device.

This patch is based on the R8A7791 sound work by Kuninori Morimoto.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>

---
  arch/arm/boot/dts/r8a7794.dtsi |  171 +++++++++++++++++++++++++++++++++++++++++
  1 file changed, 171 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -1309,4 +1309,175 @@
  		#iommu-cells = <1>;
  		status = "disabled";
  	};
+
+	rcar_sound: sound@ec500000 {
+		/*
+		 * #sound-dai-cells is required
+		 *
+		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+		 */
+		compatible = "renesas,rcar_sound-r8a7794",
+			     "renesas,rcar_sound-gen2";
+		reg =	<0 0xec500000 0 0x1000>, /* SCU */
+			<0 0xec5a0000 0 0x100>,  /* ADG */
+			<0 0xec540000 0 0x1000>, /* SSIU */
+			<0 0xec541000 0 0x280>,  /* SSI */
+			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
+		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+		clocks = <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+			 <&mstp10_clks R8A7794_CLK_SSI9>,
+			 <&mstp10_clks R8A7794_CLK_SSI8>,
+			 <&mstp10_clks R8A7794_CLK_SSI7>,
+			 <&mstp10_clks R8A7794_CLK_SSI6>,
+			 <&mstp10_clks R8A7794_CLK_SSI5>,
+			 <&mstp10_clks R8A7794_CLK_SSI4>,
+			 <&mstp10_clks R8A7794_CLK_SSI3>,
+			 <&mstp10_clks R8A7794_CLK_SSI2>,
+			 <&mstp10_clks R8A7794_CLK_SSI1>,
+			 <&mstp10_clks R8A7794_CLK_SSI0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC9>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC8>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC7>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC6>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC5>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC4>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC3>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC2>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC1>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
+			 <&mstp10_clks R8A7794_CLK_SCU_DVC0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_DVC1>,
+			 <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
+			 <&m2_clk>;
+		clock-names = "ssi-all",
+			      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+			      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+			      "src.9", "src.8", "src.7", "src.6", "src.5",
+			      "src.4", "src.3", "src.2", "src.1", "src.0",
+			      "clk_a", "clk_b", "clk_c", "clk_i";
+		power-domains = <&cpg_clocks>;
+
+		status = "disabled";
+		rcar_sound,src {
+			src0: src@0 {
+				interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x85>, <&audma0 0x9a>;
+				dma-names = "rx", "tx";
+			};
+			src1: src@1 {
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x87>, <&audma0 0x9c>;
+				dma-names = "rx", "tx";
+			};
+			src2: src@2 {
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x89>, <&audma0 0x9e>;
+				dma-names = "rx", "tx";
+			};
+			src3: src@3 {
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+				dma-names = "rx", "tx";
+			};
+			src4: src@4 {
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+				dma-names = "rx", "tx";
+			};
+			src5: src@5 {
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+				dma-names = "rx", "tx";
+			};
+			src6: src@6 {
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x91>, <&audma0 0xb4>;
+				dma-names = "rx", "tx";
+			};
+			src7: src@7 {
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x93>, <&audma0 0xb6>;
+				dma-names = "rx", "tx";
+			};
+			src8: src@8 {
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x95>, <&audma0 0xb8>;
+				dma-names = "rx", "tx";
+			};
+			src9: src@9 {
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x97>, <&audma0 0xba>;
+				dma-names = "rx", "tx";
+			};
+		};

My reading of the documentation is that src0, 7, 8 and 9 are not
present on the r8a7794. I am referring to Figure 38.1b or r1.02 of
the R-Car Gen2 User's Manual.

Indeed, thank you for the timely comment (I'm working on the series respin)! However, table 7A.12 still lists the SRC0/7/8/9 clocks for R8A7794, table 11.1 still lists SRC0/7/8/9 interrupts for R8A7794, and table 43.4 still lists SRC0/7/8/9 MID+RID for R8A7794 -- go figure...

[snip]

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux