On Tue, Feb 09, 2016 at 02:04:07AM +0300, Sergei Shtylyov wrote:
> Define the generic R8A7794 part of the sound device node.
> This sound device is a complex one and comprises the Audio Clock Generator
> (ADG), Sampling Rate Converter Unit (SCU), Serial Sound Interface [Unit]
> (SSI[U]), and Audio DMAC-Peripheral-Peripheral.
> It is up to the board file to enable the device.
>
> This patch is based on the R8A7791 sound work by Kuninori Morimoto.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>
> ---
> arch/arm/boot/dts/r8a7794.dtsi | 171 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 171 insertions(+)
>
> Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
> +++ renesas/arch/arm/boot/dts/r8a7794.dtsi
> @@ -1309,4 +1309,175 @@
> #iommu-cells = <1>;
> status = "disabled";
> };
> +
> + rcar_sound: sound@ec500000 {
> + /*
> + * #sound-dai-cells is required
> + *
> + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
> + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
> + */
> + compatible = "renesas,rcar_sound-r8a7794",
> + "renesas,rcar_sound-gen2";
> + reg = <0 0xec500000 0 0x1000>, /* SCU */
> + <0 0xec5a0000 0 0x100>, /* ADG */
> + <0 0xec540000 0 0x1000>, /* SSIU */
> + <0 0xec541000 0 0x280>, /* SSI */
> + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri */
> + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
> +
> + clocks = <&mstp10_clks R8A7794_CLK_SSI_ALL>,
> + <&mstp10_clks R8A7794_CLK_SSI9>,
> + <&mstp10_clks R8A7794_CLK_SSI8>,
> + <&mstp10_clks R8A7794_CLK_SSI7>,
> + <&mstp10_clks R8A7794_CLK_SSI6>,
> + <&mstp10_clks R8A7794_CLK_SSI5>,
> + <&mstp10_clks R8A7794_CLK_SSI4>,
> + <&mstp10_clks R8A7794_CLK_SSI3>,
> + <&mstp10_clks R8A7794_CLK_SSI2>,
> + <&mstp10_clks R8A7794_CLK_SSI1>,
> + <&mstp10_clks R8A7794_CLK_SSI0>,
> + <&mstp10_clks R8A7794_CLK_SCU_SRC9>,
> + <&mstp10_clks R8A7794_CLK_SCU_SRC8>,
> + <&mstp10_clks R8A7794_CLK_SCU_SRC7>,
> + <&mstp10_clks R8A7794_CLK_SCU_SRC6>,
> + <&mstp10_clks R8A7794_CLK_SCU_SRC5>,
> + <&mstp10_clks R8A7794_CLK_SCU_SRC4>,
> + <&mstp10_clks R8A7794_CLK_SCU_SRC3>,
> + <&mstp10_clks R8A7794_CLK_SCU_SRC2>,
> + <&mstp10_clks R8A7794_CLK_SCU_SRC1>,
> + <&mstp10_clks R8A7794_CLK_SCU_SRC0>,
> + <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
> + <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
> + <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
> + <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
> + <&mstp10_clks R8A7794_CLK_SCU_DVC0>,
> + <&mstp10_clks R8A7794_CLK_SCU_DVC1>,
> + <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
> + <&m2_clk>;
> + clock-names = "ssi-all",
> + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
> + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
> + "src.9", "src.8", "src.7", "src.6", "src.5",
> + "src.4", "src.3", "src.2", "src.1", "src.0",
> + "clk_a", "clk_b", "clk_c", "clk_i";
> + power-domains = <&cpg_clocks>;
> +
> + status = "disabled";
> + rcar_sound,src {
> + src0: src@0 {
> + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x85>, <&audma0 0x9a>;
> + dma-names = "rx", "tx";
> + };
> + src1: src@1 {
> + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x87>, <&audma0 0x9c>;
> + dma-names = "rx", "tx";
> + };
> + src2: src@2 {
> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x89>, <&audma0 0x9e>;
> + dma-names = "rx", "tx";
> + };
> + src3: src@3 {
> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x8b>, <&audma0 0xa0>;
> + dma-names = "rx", "tx";
> + };
> + src4: src@4 {
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x8d>, <&audma0 0xb0>;
> + dma-names = "rx", "tx";
> + };
> + src5: src@5 {
> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x8f>, <&audma0 0xb2>;
> + dma-names = "rx", "tx";
> + };
> + src6: src@6 {
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x91>, <&audma0 0xb4>;
> + dma-names = "rx", "tx";
> + };
> + src7: src@7 {
> + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x93>, <&audma0 0xb6>;
> + dma-names = "rx", "tx";
> + };
> + src8: src@8 {
> + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x95>, <&audma0 0xb8>;
> + dma-names = "rx", "tx";
> + };
> + src9: src@9 {
> + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x97>, <&audma0 0xba>;
> + dma-names = "rx", "tx";
> + };
> + };
My reading of the documentation is that src0, 7, 8 and 9 are not
present on the r8a7794. I am referring to Figure 38.1b or r1.02 of
the R-Car Gen2 User's Manual.
[snip]
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
