Ulf Hansson <ulf.hansson@xxxxxxxxxx> writes: > On 15 December 2015 at 22:40, Eric Anholt <eric@xxxxxxxxxx> wrote: >> Since the pm_genpd_exit() patch is still going through review, and >> other drivers in the tree just ignore the error cases, Ulf offered to >> merge the series as a builtin driver not depending on that interface. >> We still avoid dangling pointer references, by just continuing with >> probing if of_genpd_add_provider_onecell() fails. We can easily go >> back and update the driver when a pm_genpd_exit() lands. >> >> Alexander Aring (3): >> ARM: bcm2835: add rpi power domain driver >> dt-bindings: add rpi power domain driver bindings >> ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT. >> >> Eric Anholt (1): >> ARM: bcm2835: Define two new packets from the latest firmware. >> >> .../bindings/arm/bcm/raspberrypi,bcm2835-power.txt | 47 ++++ >> arch/arm/boot/dts/bcm2835-rpi.dtsi | 11 + >> arch/arm/boot/dts/bcm2835.dtsi | 2 +- >> arch/arm/mach-bcm/Kconfig | 10 + >> arch/arm/mach-bcm/Makefile | 1 + >> arch/arm/mach-bcm/raspberrypi-power.c | 247 +++++++++++++++++++++ >> include/dt-bindings/arm/raspberrypi-power.h | 41 ++++ >> include/soc/bcm2835/raspberrypi-firmware.h | 2 + >> 8 files changed, 360 insertions(+), 1 deletion(-) >> create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt >> create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c >> create mode 100644 include/dt-bindings/arm/raspberrypi-power.h >> >> -- >> 2.6.2 >> > > Besides a nitpick for patch2, I would also reverse the order of patch3 > and patch2. DT docs should go in before the actual parsing of the new > bindings/compatibles. > > Anyway, for the hole series, you may add my: > > Reviewed-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Would your tree be pulling the series (since it's power domains), or should I (since it's SOC stuff)?
Attachment:
signature.asc
Description: PGP signature