Since the pm_genpd_exit() patch is still going through review, and other drivers in the tree just ignore the error cases, Ulf offered to merge the series as a builtin driver not depending on that interface. We still avoid dangling pointer references, by just continuing with probing if of_genpd_add_provider_onecell() fails. We can easily go back and update the driver when a pm_genpd_exit() lands. Alexander Aring (3): ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT. Eric Anholt (1): ARM: bcm2835: Define two new packets from the latest firmware. .../bindings/arm/bcm/raspberrypi,bcm2835-power.txt | 47 ++++ arch/arm/boot/dts/bcm2835-rpi.dtsi | 11 + arch/arm/boot/dts/bcm2835.dtsi | 2 +- arch/arm/mach-bcm/Kconfig | 10 + arch/arm/mach-bcm/Makefile | 1 + arch/arm/mach-bcm/raspberrypi-power.c | 247 +++++++++++++++++++++ include/dt-bindings/arm/raspberrypi-power.h | 41 ++++ include/soc/bcm2835/raspberrypi-firmware.h | 2 + 8 files changed, 360 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c create mode 100644 include/dt-bindings/arm/raspberrypi-power.h -- 2.6.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
