On 15 December 2015 at 22:40, Eric Anholt <eric@xxxxxxxxxx> wrote: > Since the pm_genpd_exit() patch is still going through review, and > other drivers in the tree just ignore the error cases, Ulf offered to > merge the series as a builtin driver not depending on that interface. > We still avoid dangling pointer references, by just continuing with > probing if of_genpd_add_provider_onecell() fails. We can easily go > back and update the driver when a pm_genpd_exit() lands. > > Alexander Aring (3): > ARM: bcm2835: add rpi power domain driver > dt-bindings: add rpi power domain driver bindings > ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT. > > Eric Anholt (1): > ARM: bcm2835: Define two new packets from the latest firmware. > > .../bindings/arm/bcm/raspberrypi,bcm2835-power.txt | 47 ++++ > arch/arm/boot/dts/bcm2835-rpi.dtsi | 11 + > arch/arm/boot/dts/bcm2835.dtsi | 2 +- > arch/arm/mach-bcm/Kconfig | 10 + > arch/arm/mach-bcm/Makefile | 1 + > arch/arm/mach-bcm/raspberrypi-power.c | 247 +++++++++++++++++++++ > include/dt-bindings/arm/raspberrypi-power.h | 41 ++++ > include/soc/bcm2835/raspberrypi-firmware.h | 2 + > 8 files changed, 360 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt > create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c > create mode 100644 include/dt-bindings/arm/raspberrypi-power.h > > -- > 2.6.2 > Besides a nitpick for patch2, I would also reverse the order of patch3 and patch2. DT docs should go in before the actual parsing of the new bindings/compatibles. Anyway, for the hole series, you may add my: Reviewed-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
