Hi, this patch series contains at first a patch for the power domain subsystem which offers to uninit generic power domains when init was called before. The RPi Power-Domains need to be enabled/disabled by interacting with the RPi firmware which can fail. To cleanup the probing we need to undo the power domains again which was registered before. - Alex changes since PATCH (was RFCv2 before): - add WARN_ON_ONCE if there are still references from generic power domain inside the power domain subsystem when running pm_genpd_uninit. - add mutex_destroy when running pm_genpd_uninit. - split devicetree binding for rpi power domain driver into a separate patch. - rename config RASPBERRY_POWER to RASPBERRYPI_POWER - order list of <linux/...> includes alphabetical. - use rpi_ prefix than raspberrypi_ prefix. - rename _DT_BINDINGS_ARM_BCM2835_MBOX_POWER_H to _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H changes since RFCv2: - add pm_genpd_uninit to handle probing failure. - move power domain drive to his own driver in arch/arm/mach-bcm/ Also add own devicetree node for this driver, "raspberrypi,bcm2835-power". - Removing all power domains which might exists for the firmware API but we currently have no use-case for it. I tried to keep the same domain numbering in generic power domains subsystem like they are offered from the firmware API. This works, all power_domains which are NULL inside the array of genpd_onecell_data.domains[#] will be ignored. - Adding Eric Anholt and me to the authors. - Creating devicetree documentation for the power domain driver. - fix error handling in raspberrypi_firmware_set_power. - Remove comment about mapping between power domains array, this is not necessary anymore. I add a "enabled" attribute to raspberrypi_power_domain which indicates if a domain should be registered or not (zeroed values does not indicate such handling, but enabled is false then). - remove "goto mbox" not necessary anymore because an own driver implementation. - Update devicetrees for changes in v2. Alexander Aring (3): power: domain: add pm_genpd_uninit ARM: bcm2835: add rpi power domain driver devicetree: add rpi power domain driver bindings .../bindings/arm/bcm/raspberrypi,bcm2835-power.txt | 25 +++ arch/arm/boot/dts/bcm2835-rpi.dtsi | 11 ++ arch/arm/boot/dts/bcm2835.dtsi | 2 +- arch/arm/mach-bcm/Kconfig | 10 ++ arch/arm/mach-bcm/Makefile | 1 + arch/arm/mach-bcm/raspberrypi-power.c | 180 +++++++++++++++++++++ drivers/base/power/domain.c | 22 +++ include/dt-bindings/arm/raspberrypi-power.h | 14 ++ include/linux/pm_domain.h | 4 + 9 files changed, 268 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c create mode 100644 include/dt-bindings/arm/raspberrypi-power.h -- 2.6.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
