[PATCH RFC 0/4] ARM: bcm2835: assign pins to sdhci pinctrl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch series fixes the pinctrl of the sdhci pins for all
Raspberry Pis.

The pin configuration based on the proprietary DTS [1].

[1] - https://www.raspberrypi.org/documentation/configuration/images/dt-blob.dts

Stefan Wahren (4):
  ARM: bcm2835: remove sdhci pins from GPIO pinctrl
  ARM: bcm2835: rename sdhci pin group
  ARM: bcm2835: specify card detect pin for RPi B
  ARM: bcm2835: assign pins to sdhci pinctrl

 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts |    6 +++++-
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts |    6 +++++-
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts |    6 +++++-
 arch/arm/boot/dts/bcm2835-rpi-b.dts      |   11 ++++++++++-
 arch/arm/boot/dts/bcm2835-rpi.dtsi       |    2 +-
 5 files changed, 26 insertions(+), 5 deletions(-)

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux