On Mon, Oct 14, 2013 at 12:40:26PM -0600, Stephen Warren wrote: > >>> diff --git a/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt > >> > >>> +Optional properties : > >> > >>> + - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter > >>> + presence. > >> > >> Is that actually a property of the BQ24735 chip itself (i.e. is it an > >> output signal from the chip), or part of the board/system? > > > > The gpio itself is actually what the IRQ line is tied to from the > > bq24735 -> tegra (in this case). In other words this is a Host GPIO that > > is configured as an input and connected to the bq24735. > > Ok, so this is the ACOK output pin? In that case, it's fine. It might be > worth mentioning that explicitly though. I added the comment to the documentation and applied the patch with a "Thanks-to: Stephen Warren <swarren@xxxxxxxxxxxxx>" tag. :) Anton -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html