On Thu, 2013-08-29 at 11:25 +0300, Dan Carpenter wrote:
> My static checker complains that on some arches unsigned longs can be 8
> characters which is larger than the buffer is only 6 chars.
> Additionally, Ben Hutchings points out that the buffer actually holds
> big endian data and the buffer we are reading from is CPU endian.
It's not really as clear-cut as that. :-) But I think it's slightly
more logical this way.
> Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Reviewed-by: Ben Hutchings <bhutchings@xxxxxxxxxxxxxx>
> ---
> v2: fix endian annotations and reverse the beXX_to_cpu() calls so that
> they say cpu_to_beXX().
>
> diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
> index fdf9307..0b12866 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -1100,10 +1100,10 @@ static void fec_get_mac(struct net_device *ndev)
> * 4) FEC mac registers set by bootloader
> */
> if (!is_valid_ether_addr(iap)) {
> - *((unsigned long *) &tmpaddr[0]) =
> - be32_to_cpu(readl(fep->hwp + FEC_ADDR_LOW));
> - *((unsigned short *) &tmpaddr[4]) =
> - be16_to_cpu(readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
> + *((__be32 *) &tmpaddr[0]) =
> + cpu_to_be32(readl(fep->hwp + FEC_ADDR_LOW));
> + *((__be16 *) &tmpaddr[4]) =
> + cpu_to_be16(readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
> iap = &tmpaddr[0];
> }
>
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
