On 8/21/2013 11:05 PM, Stephen Warren wrote:
On 08/21/2013 07:06 AM, George Cherian wrote:
Hi Stephen,
On 8/20/2013 10:23 PM, Stephen Warren wrote:
ID pins are connected to pcf8575, and the pcf8575's interrupt line is
inturn connected to
gpio bank6 pin 11, we use this gpio interrupt to detect the ID pin
change.
In that case, the PCF8575 node needs to be a GPIO controller and an IRQ
controller, as does the driver for the PCF8575. This binding should have
a single entry in the gpios property, and the driver can call
gpio_to_irq() on that so it knows which IRQ to request.
You meant some thing like this?
pcf_usb: pcf8575@21 {
compatible = "ti,pcf8575";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio6>;
interrupts = <11 2>;
interrupt-controller;
#interrupt-cells = <2>;
};
usb_vid_gpio {
compatible = "ti,dra7xx-usb";
gpios = <&pcf_usb 1 0>;
};
Yes.
Except that the compatible value for the usb_vid_gpio node still looks
wrong, since I think that node isn't anything to do with any particular SoC.
Yes will fix that too in v2.
--
-George
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
