On Tue, Oct 27, 2020 at 11:26 PM David Gibson
<david@xxxxxxxxxxxxxxxxxxxxx> wrote:
>
> On Tue, Oct 27, 2020 at 02:55:17PM -0500, Rob Herring wrote:
> > On Tue, Oct 27, 2020 at 10:58 AM André Przywara <andre.przywara@xxxxxxx> wrote:
> > >
> > > On 26/10/2020 21:51, Rob Herring wrote:
> > > > On Thu, Oct 22, 2020 at 10:23 AM Tom Rini <trini@xxxxxxxxxxxx> wrote:
> > > >> On Fri, Oct 23, 2020 at 01:58:04AM +1100, David Gibson wrote:
> > > >>> On Thu, Oct 22, 2020 at 08:32:54AM -0400, Tom Rini wrote:
> > > >>>> On Thu, Oct 22, 2020 at 03:00:13PM +1100, David Gibson wrote:
> > > >>>>> On Wed, Oct 21, 2020 at 06:49:14PM -0400, Tom Rini wrote:
> > > >
> > > > [...]
> > > >
> > > >>>>>> But what does all of this _mean_ ? I kinda think I have an answer now.
> > > >>>>>> One of the things that sticks out is 6dcb8ba408ec adds a lot and
> > > >>>>>> 11738cf01f15 reduces it just a little.
> > > >>>>>
> > > >>>>> Ah, that's a tricky one. If we don't handle unaligned accesses we
> > > >>>>> instead get intermittent bug reports where it just crashes.
> > > >>>>
> > > >>>> We really need to talk about that then. There was a problem of people
> > > >>>> turning off the sanity check for making sure the entire device tree was
> > > >>>> aligned and then having everything crash.
> > > >>>
> > > >>> Ok... I'm not really sure where you're going with that thought.
> > > >>
> > > >> In my reading of the mailing list history of how this issue came up,
> > > >> it was someone was booting a dragonboard or something, and they (or
> > > >> rather, the board maintainer set by default) the flag to use the device
> > > >> tree wherever it is in memory and NOT to relocate it to a properly
> > > >> aligned address. This in turn lead to the kernel getting an unaligned
> > > >> device tree and everything crashing. The "I know what I'm doing" flag
> > > >> was set, violated the documented requirements for device trees need to
> > > >> reside in memory and everything blew up.
> > > >>
> > > >> After that it was noticed that there could be some internal
> > > >> mis-alignment and if you tried those accesses on a CPU that doesn't
> > > >> support doing those reads easily there could be problems, but that's not
> > > >> a common at all case (as noted by it not having been seen in practice).
> > > >
> > > > Nor a problem on many environments to begin with. More below...
> > > >
> > > >>>>> I suppose we could add an ASSUME_ALIGNED_ACCESS flag, and it will just
> > > >>>>> break for either an unaligned dtb (unlikely) or if you attempt to load
> > > >>>>> an unaligned value from a property (more likely, but don't add the
> > > >>>>> flag if you're not sure you don't need it).
> > > >>>>
> > > >>>> So long as it's abstracted in such a way that we don't grow the size of
> > > >>>> everything again, yes, that is the right way forward I think.
> > > >>>
> > > >>> All the ASSUME flags should be resolved at compile time (at least with
> > > >>> normal optimization levels enabled in the compiler), so testing for
> > > >>> those shouldn't increase size at all. If they do, something is wrong.
> > > >>
> > > >> I'm saying that how ever this new ASSUME flag is done, it needs to be
> > > >> done in such a way the compiler really will be smart about it. So
> > > >> something like making a new function that does fdt64_ld() if we aren't
> > > >> ASSUME_ALIGNED_ACCESS and fdt64_to_cpu() if we are
> > > >> ASSUME_ALIGNED_ACCESS.
> > > >
> > > > Ah, unaligned accesses again... To summarize, both performance and
> > > > size suffer with not doing unaligned accesses.
> > > >
> > > > Why not a HAS_UNALIGNED_ACCESS flag instead (or the inverse) that will
> > > > do unaligned accesses? That would be more aligned with what the system
> > > > can support rather than sanity checking associated with ASSUME_*.
>
> So, there are kind of two things here, (1) is "my platform can handle
> unaligned accesses" and (2) is "assume I don't need unaligned
> accesses". We can use the fast & small versions of fdt32_ld() etc. if
> either is true. However we need to consider those separately, because
> they can be independently true (or not) for different reasons. (1)
> depends on the hardware, whereas (2) depends on how you're using dtc,
> and, see below, you may need at least unaligned-handling fdt64_ld() in
> more cases than you think.
Okay, I guess you were thinking of (2) for ASSUME_ALIGNED_ACCESS, but
I read it as (1).
> > > > To repeat from last time, everything ARMv6 and up can do unaligned
> > > > accesses if enabled.
> > >
> > > But that requires the MMU to be enabled, doesn't it? If I read the ARM
> > > ARM correctly, unaligned accesses always trap on device memory,
> > > regardless of SCTLR.A. And without the MMU enabled everything is device
> > > memory. We compile U-Boot with -mno-unaligned-access/-mstrict-align to
> > > cope with that, and that most likely affects libfdt as well?
> >
> > Ah yes, I think you are right.
> >
> > In that case, seems like we should figure out whether (internal)
> > unaligned accesses are possible with dtc generated dtbs at least
> > rather than just "not a common at all case (as noted by it not having
> > been seen in practice)." I'm sure David will point out that not all
> > dtbs come from dtc, but all the ones u-boot deals with do in
> > reality.
>
> Assuming the blob itself is 8-byte aligned in memory, then all
> structural elements (i.e. the tree metadata) of a compliant dtb will
> be naturally aligned. The spec requires 8-byte alignment of the mem
> reserve block w.r.t. the base of the blob and 4 byte aligned structure
> block w.r.t. the base of the blob. Likewise the layout of the mem
> reserve block will preserve 8-byte alignment of all the 64-bit values
> it contains, assuming the block itself starts 8-byte aligned.
> Similarly the structure blob will preserve 4-byte alignment of all its
> tags and other structural data (this amounts to requiring an alignment
> gap after node names and property values).
>
> However, "all structural elements" does not include values within
> property values themselves. Assuming propery alignment of the blocks
> and the blob itself, then all property values will *begin* 4 byte
> aligned. However that leaves two relevant cases:
>
> a) 64-bit property values may be 4-byte aligned but not 8-byte
> aligned
I'd assume that while an arch may support only the above in terms of
misalignment, an arch that supports any alignment would always support
this as part of that. It would just be odd to support byte alignment
only up to 32-bit. I don't think we need to optimize the former case.
> b) complex property values including both strings and integers
> typically use a packed representation with no alignment gaps.
> Such property structures are usually avoided in modern bindings,
> but they definitely exist in a bunch of older bindings. Obviously
> that means that integer values sitting after arbitrary length
> strings may not have any natural alignment
That's the user's problem IMO. Users of older bindings having this
aren't likely using a newish function like fdt32_ld either.
> So acccesses made by libfdt internally should be safe(*) assuming the
> blob itself is loaded 8-byte aligned, and the dtb is compliant.
> However the libfdt user may hit both problems (a) and (b) getting
> things they actually want from the tree. fdt{32,64}_{ld,st}() are
> intended to handle those cases, so that they're useful for the caller
> to pull things from properties as well as for libfdt internal
> accesses.
>
> (*) There are a number of other functions that looked like they might
> be dangerous for case (a) because they are based on 64-bit
> property values: fdt_setprop_inplace_u64(), fdt_property_u64(),
> fdt_setprop_u64(), fdt_appendprop_u64() and
> fdt_appendprop_addrrange(). However I think they're actually
> ok, because the way they're built in terms of other functions
> means there's implicitly a memcpy() from a byte buffer.
>
> > > Also some 32-bit ARM platforms run U-Boot proper with the MMU disabled
> > > all the time, and I know of at least the sunxi-aarch64 SPL running with
> > > the MMU off as well.
> >
> > I'm making a mental note of this for the next time performance issues come up.
>
> Right, running early with MMU off is definitely a real use case for
> libfdt. For similar reasons we can't assume we have an OS which will
> trap and handle unaligned accesses, which we might for a more
> conventional userspace library.
>
> This kind of underscores why I'm a bit hesitant to introduce "my
> platform handles unaligned acccesses" flag. Not only does it require
> detailed knowledge of the target CPU, but it can also depend on
> exactly what mode that hardware is in.
I think there's a more simple solution with no flags. Given all
internal accesses are at least 4-byte aligned, libfdt should just do
32-bit accesses internally (as it used to). Maybe we need a check up
front that the dtb is 8-byte aligned though. fdt{32,64}_ld() can just
keep the same implementation. If users want it optimized, then they
can do their own accessors.
Rob
