Hi there,
here's some strange bug. Bug is reproducible:
BIOS: Set AMD overclocking configuration to Auto
Linux: /proc/cpuinfo and cpufreq-info show 1000 MHz on idle
Reboot
BIOS: Set AMD overclocking configuration to x7 (1400 MHz)
Linux: /proc/cpuinfo shows 1000 MHz on idle
Start Browser
Start cpufreq-info: output see attachment 01
screen flickers 1x, one black block ~9x15px appears in upper left corner
cpu load ceases (browser loaded)
Start cpufreq-info: output see attachment 02
screen flickers 1x, screen becomes normal again
cpufreq-info is in an endless loop, unkillable
strace on cpu-freq is unkillable, also
Interaction with some programs become very slow (need to wait for file system access?) but xterm with new bash prompt opens/closes in normal speed
System cann't reboot but SysRq 'b' is working
Reboot
Start cpufreq-info: strace see attachment 03
Same effects as 01
Start cpufreq-info: strace see attachment 04
Same effects as 02, but after call 04 the black block keeps flickering
CPU AMD Athlon64 X2
Kernel 4.4.0, 64 bit
cpufreq-info 32 bit 008-1.1 (Debian)
Screen driver /usr/lib/xorg/modules/libfb.so for X 1.20.4
Kernel modules radeon and radeonfb loaded (Most probably radeon is active, radeonfb inactive)
All attachments (01, 02, 03, 04) are also copied in this message.
I hope this bug report is right in this list. I hope it helps. I don't need a reply for my daily work (just leaving "overclocking" set to "Auto") but I want to leave the comment here that I have the impression that the Linux support of old hardware is ceasing (e.g. Irda, graphics) - some things are working with old kernels and don't anymore with newer kernels (drivers still present but don't fit to each other).
Best regards
Jonas Bechtel
== 01 ==
Bitte melden Sie Fehler an cpufreq@xxxxxxxxxxxxxxx.
analysiere CPU 0:
Treiber: powernow-k8
Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 1
Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 1
Maximale Dauer eines Taktfrequenzwechsels: 109 us.
Hardwarebedingte Grenzen der Taktfrequenz: 1000 MHz - 2.50 GHz
mögliche Taktfrequenzen: 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.00 GHz, 1.80 GHz, 1000 MHz
mögliche Regler: ondemand, performance
momentane Taktik: die Frequenz soll innerhalb 1000 MHz und 2.50 GHz.
liegen. Der Regler "ondemand" kann frei entscheiden,
welche Taktfrequenz innerhalb dieser Grenze verwendet wird.
momentane Taktfrequenz ist 2.40 GHz.
Getötet
== 02 ==
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Bitte melden Sie Fehler an cpufreq@xxxxxxxxxxxxxxx.
analysiere CPU 0:
Treiber: powernow-k8
Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 1
Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 1
Maximale Dauer eines Taktfrequenzwechsels: 109 us.
Hardwarebedingte Grenzen der Taktfrequenz: 1000 MHz - 2.50 GHz
mögliche Taktfrequenzen: 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.00 GHz, 1.80 GHz, 1000 MHz
mögliche Regler: ondemand, performance
momentane Taktik: die Frequenz soll innerhalb 1000 MHz und 2.50 GHz.
liegen. Der Regler "ondemand" kann frei entscheiden,
welche Taktfrequenz innerhalb dieser Grenze verwendet wird.
momentane Taktfrequenz ist 1000 MHz.
[Hanging unkillable here]
== 03 ==
execve("/usr/bin/cpufreq-info", ["cpufreq-info"], 0xfffd36c0 /* 36 vars */) = 0
brk(NULL) = 0x565b7000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf770f000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib", {st_mode=S_IFDIR|0755, st_size=248, ...}) = 0
openat(AT_FDCWD, "tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=220379, ...}) = 0
mmap2(NULL, 220379, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf76d9000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/usr/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@#\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=26160, ...}) = 0
mmap2(NULL, 28884, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf76d1000
mmap2(0xf76d3000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf76d3000
mmap2(0xf76d5000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xf76d5000
mmap2(0xf76d7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0xf76d7000
close(3) = 0
openat(AT_FDCWD, "[redacted]/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/lib/i386-linux-gnu/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\254\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1947056, ...}) = 0
mmap2(NULL, 1955712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf74f3000
mprotect(0xf750c000, 1830912, PROT_NONE) = 0
mmap2(0xf750c000, 1368064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19000) = 0xf750c000
mmap2(0xf765a000, 458752, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x167000) = 0xf765a000
mmap2(0xf76cb000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d7000) = 0xf76cb000
mmap2(0xf76ce000, 10112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xf76ce000
close(3) = 0
set_thread_area({entry_number=-1, base_addr=0xf7710500, limit=0x0fffff, seg_32bit=1, contents=0, read_exec_only=0, limit_in_pages=1, seg_not_present=0, useable=1}) = 0 (entry_number=12)
mprotect(0xf76cb000, 8192, PROT_READ) = 0
mprotect(0xf76d7000, 4096, PROT_READ) = 0
mprotect(0x565b5000, 4096, PROT_READ) = 0
mprotect(0xf773c000, 4096, PROT_READ) = 0
munmap(0xf76d9000, 220379) = 0
brk(NULL) = 0x565b7000
brk(0x565d8000) = 0x565d8000
brk(0x565d9000) = 0x565d9000
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=9814000, ...}) = 0
mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf72f3000
mmap2(NULL, 2596864, PROT_READ, MAP_PRIVATE, 3, 0xb8000) = 0xf7079000
close(3) = 0
fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0x88, 0), ...}) = 0
write(1, "cpufrequtils 008: cpufreq-info ("..., 63) = 63
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0
read(3, "# Locale name alias data base.\n#"..., 4096) = 2995
read(3, "", 4096) = 0
close(3) = 0
openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/cpufrequtils.mo", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=10540, ...}) = 0
mmap2(NULL, 10540, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf770c000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=26400, ...}) = 0
mmap2(NULL, 26400, PROT_READ, MAP_SHARED, 3, 0) = 0xf7705000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=13736, ...}) = 0
mmap2(NULL, 16420, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf7700000
mmap2(0xf7701000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0xf7701000
mmap2(0xf7702000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7702000
mmap2(0xf7703000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7703000
close(3) = 0
mprotect(0xf7703000, 4096, PROT_READ) = 0
write(1, "Bitte melden Sie Fehler an cpufr"..., 52) = 52
openat(AT_FDCWD, "/proc/stat", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(3, "cpu 1071 0 847 11936 5524 0 15 "..., 1024) = 1024
read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "..., 1024) = 263
read(3, "", 1024) = 0
close(3) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
write(1, "analysiere CPU 0:\n", 18) = 18
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq", O_RDONLY) = -1 EACCES (Keine Berechtigung)
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver", O_RDONLY) = 3
read(3, "powernow-k8\n", 4095) = 12
close(3) = 0
write(1, " Treiber: powernow-k8\n", 23) = 23
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/related_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Folgende CPUs laufen mit der g"..., 67) = 67
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/affected_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Die Taktfrequenz folgender CPU"..., 71) = 71
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency", O_RDONLY) = 3
read(3, "109000\n", 4095) = 7
close(3) = 0
write(1, " Maximale Dauer eines Taktfrequ"..., 53) = 53
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " Hardwarebedingte Grenzen der T"..., 65) = 65
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY) = 3
read(3, "2500000 2400000 2200000 2000000 "..., 4095) = 49
close(3) = 0
write(1, " m\303\266gliche Taktfrequenzen: 2.50"..., 87) = 87
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors", O_RDONLY) = 3
read(3, "ondemand performance \n", 4095) = 22
close(3) = 0
write(1, " m\303\266gliche Regler: ondemand, pe"..., 42) = 42
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", O_RDONLY) = 3
read(3, "ondemand\n", 4095) = 9
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " momentane Taktik: die Frequenz"..., 71) = 71
write(1, " liegen. Der "..., 153) = 153
write(1, " momentane Taktfrequenz ist 100"..., 39) = 39
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state", O_RDONLY) = 3
read(3, <unfinished ...>) = ?
+++ killed by SIGKILL +++
== 04 ==
execve("/usr/bin/cpufreq-info", ["cpufreq-info"], 0xffcc8e90 /* 36 vars */) = 0
brk(NULL) = 0x5658c000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf771d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib", {st_mode=S_IFDIR|0755, st_size=248, ...}) = 0
openat(AT_FDCWD, "tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=220379, ...}) = 0
mmap2(NULL, 220379, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf76e7000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/usr/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@#\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=26160, ...}) = 0
mmap2(NULL, 28884, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf76df000
mmap2(0xf76e1000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf76e1000
mmap2(0xf76e3000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xf76e3000
mmap2(0xf76e5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0xf76e5000
close(3) = 0
openat(AT_FDCWD, "[redacted]/lib/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/lib/i386-linux-gnu/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\254\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1947056, ...}) = 0
mmap2(NULL, 1955712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf7501000
mprotect(0xf751a000, 1830912, PROT_NONE) = 0
mmap2(0xf751a000, 1368064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19000) = 0xf751a000
mmap2(0xf7668000, 458752, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x167000) = 0xf7668000
mmap2(0xf76d9000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d7000) = 0xf76d9000
mmap2(0xf76dc000, 10112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xf76dc000
close(3) = 0
set_thread_area({entry_number=-1, base_addr=0xf771e500, limit=0x0fffff, seg_32bit=1, contents=0, read_exec_only=0, limit_in_pages=1, seg_not_present=0, useable=1}) = 0 (entry_number=12)
mprotect(0xf76d9000, 8192, PROT_READ) = 0
mprotect(0xf76e5000, 4096, PROT_READ) = 0
mprotect(0x5658a000, 4096, PROT_READ) = 0
mprotect(0xf774a000, 4096, PROT_READ) = 0
munmap(0xf76e7000, 220379) = 0
brk(NULL) = 0x5658c000
brk(0x565ad000) = 0x565ad000
brk(0x565ae000) = 0x565ae000
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=9814000, ...}) = 0
mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7301000
mmap2(NULL, 2596864, PROT_READ, MAP_PRIVATE, 3, 0xb8000) = 0xf7087000
close(3) = 0
fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0x88, 0), ...}) = 0
write(1, "cpufrequtils 008: cpufreq-info ("..., 63) = 63
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0
read(3, "# Locale name alias data base.\n#"..., 4096) = 2995
read(3, "", 4096) = 0
close(3) = 0
openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/cpufrequtils.mo", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=10540, ...}) = 0
mmap2(NULL, 10540, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf771a000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=26400, ...}) = 0
mmap2(NULL, 26400, PROT_READ, MAP_SHARED, 3, 0) = 0xf7713000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=13736, ...}) = 0
mmap2(NULL, 16420, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf770e000
mmap2(0xf770f000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0xf770f000
mmap2(0xf7710000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7710000
mmap2(0xf7711000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7711000
close(3) = 0
mprotect(0xf7711000, 4096, PROT_READ) = 0
write(1, "Bitte melden Sie Fehler an cpufr"..., 52) = 52
openat(AT_FDCWD, "/proc/stat", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(3, "cpu 1374 0 870 24647 5573 0 16 "..., 1024) = 1024
read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "..., 1024) = 266
read(3, "", 1024) = 0
close(3) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
write(1, "analysiere CPU 0:\n", 18) = 18
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq", O_RDONLY) = -1 EACCES (Keine Berechtigung)
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver", O_RDONLY) = 3
read(3, "powernow-k8\n", 4095) = 12
close(3) = 0
write(1, " Treiber: powernow-k8\n", 23) = 23
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/related_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Folgende CPUs laufen mit der g"..., 67) = 67
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/affected_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Die Taktfrequenz folgender CPU"..., 71) = 71
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency", O_RDONLY) = 3
read(3, "109000\n", 4095) = 7
close(3) = 0
write(1, " Maximale Dauer eines Taktfrequ"..., 53) = 53
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " Hardwarebedingte Grenzen der T"..., 65) = 65
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY) = 3
read(3, "2500000 2400000 2200000 2000000 "..., 4095) = 49
close(3) = 0
write(1, " m\303\266gliche Taktfrequenzen: 2.50"..., 87) = 87
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors", O_RDONLY) = 3
read(3, "ondemand performance \n", 4095) = 22
close(3) = 0
write(1, " m\303\266gliche Regler: ondemand, pe"..., 42) = 42
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", O_RDONLY) = 3
read(3, "ondemand\n", 4095) = 9
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " momentane Taktik: die Frequenz"..., 71) = 71
write(1, " liegen. Der "..., 153) = 153
write(1, " momentane Taktfrequenz ist 100"..., 39) = 39
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state", O_RDONLY) = 3
read(3,
Bits & Bäume Dresden, Tour de Natur, GRÜNE LIGA, Konglomerat e. V., ADFC, (ex-)tuuwi, Hochschulgruppe Rad, Institut für Bahntechnik
Schlafende Projekte: CityConcierge, IKaRad, TerKur
Neueste Idee: Radfernbahn Berlin-Dresden, Dresden-Leipzig -> radfernbahn.de
& CityConcierge 4 Corona - http://jbechtel.de/site/sonstiges/covid19/CCfC/
Bitte melden Sie Fehler an cpufreq@xxxxxxxxxxxxxxx.
analysiere CPU 0:
Treiber: powernow-k8
Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 1
Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 1
Maximale Dauer eines Taktfrequenzwechsels: 109 us.
Hardwarebedingte Grenzen der Taktfrequenz: 1000 MHz - 2.50 GHz
mögliche Taktfrequenzen: 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.00 GHz, 1.80 GHz, 1000 MHz
mögliche Regler: ondemand, performance
momentane Taktik: die Frequenz soll innerhalb 1000 MHz und 2.50 GHz.
liegen. Der Regler "ondemand" kann frei entscheiden,
welche Taktfrequenz innerhalb dieser Grenze verwendet wird.
momentane Taktfrequenz ist 2.40 GHz.
Getötet
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Bitte melden Sie Fehler an cpufreq@xxxxxxxxxxxxxxx.
analysiere CPU 0:
Treiber: powernow-k8
Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 1
Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 1
Maximale Dauer eines Taktfrequenzwechsels: 109 us.
Hardwarebedingte Grenzen der Taktfrequenz: 1000 MHz - 2.50 GHz
mögliche Taktfrequenzen: 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.00 GHz, 1.80 GHz, 1000 MHz
mögliche Regler: ondemand, performance
momentane Taktik: die Frequenz soll innerhalb 1000 MHz und 2.50 GHz.
liegen. Der Regler "ondemand" kann frei entscheiden,
welche Taktfrequenz innerhalb dieser Grenze verwendet wird.
momentane Taktfrequenz ist 1000 MHz.
[Hanging unkillable here]
execve("/usr/bin/cpufreq-info", ["cpufreq-info"], 0xfffd36c0 /* 36 vars */) = 0
brk(NULL) = 0x565b7000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf770f000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib", {st_mode=S_IFDIR|0755, st_size=248, ...}) = 0
openat(AT_FDCWD, "tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=220379, ...}) = 0
mmap2(NULL, 220379, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf76d9000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/usr/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@#\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=26160, ...}) = 0
mmap2(NULL, 28884, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf76d1000
mmap2(0xf76d3000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf76d3000
mmap2(0xf76d5000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xf76d5000
mmap2(0xf76d7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0xf76d7000
close(3) = 0
openat(AT_FDCWD, "[redacted]/lib/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/lib/i386-linux-gnu/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\254\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1947056, ...}) = 0
mmap2(NULL, 1955712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf74f3000
mprotect(0xf750c000, 1830912, PROT_NONE) = 0
mmap2(0xf750c000, 1368064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19000) = 0xf750c000
mmap2(0xf765a000, 458752, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x167000) = 0xf765a000
mmap2(0xf76cb000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d7000) = 0xf76cb000
mmap2(0xf76ce000, 10112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xf76ce000
close(3) = 0
set_thread_area({entry_number=-1, base_addr=0xf7710500, limit=0x0fffff, seg_32bit=1, contents=0, read_exec_only=0, limit_in_pages=1, seg_not_present=0, useable=1}) = 0 (entry_number=12)
mprotect(0xf76cb000, 8192, PROT_READ) = 0
mprotect(0xf76d7000, 4096, PROT_READ) = 0
mprotect(0x565b5000, 4096, PROT_READ) = 0
mprotect(0xf773c000, 4096, PROT_READ) = 0
munmap(0xf76d9000, 220379) = 0
brk(NULL) = 0x565b7000
brk(0x565d8000) = 0x565d8000
brk(0x565d9000) = 0x565d9000
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=9814000, ...}) = 0
mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf72f3000
mmap2(NULL, 2596864, PROT_READ, MAP_PRIVATE, 3, 0xb8000) = 0xf7079000
close(3) = 0
fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0x88, 0), ...}) = 0
write(1, "cpufrequtils 008: cpufreq-info ("..., 63) = 63
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0
read(3, "# Locale name alias data base.\n#"..., 4096) = 2995
read(3, "", 4096) = 0
close(3) = 0
openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/cpufrequtils.mo", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=10540, ...}) = 0
mmap2(NULL, 10540, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf770c000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=26400, ...}) = 0
mmap2(NULL, 26400, PROT_READ, MAP_SHARED, 3, 0) = 0xf7705000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=13736, ...}) = 0
mmap2(NULL, 16420, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf7700000
mmap2(0xf7701000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0xf7701000
mmap2(0xf7702000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7702000
mmap2(0xf7703000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7703000
close(3) = 0
mprotect(0xf7703000, 4096, PROT_READ) = 0
write(1, "Bitte melden Sie Fehler an cpufr"..., 52) = 52
openat(AT_FDCWD, "/proc/stat", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(3, "cpu 1071 0 847 11936 5524 0 15 "..., 1024) = 1024
read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "..., 1024) = 263
read(3, "", 1024) = 0
close(3) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
write(1, "analysiere CPU 0:\n", 18) = 18
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq", O_RDONLY) = -1 EACCES (Keine Berechtigung)
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver", O_RDONLY) = 3
read(3, "powernow-k8\n", 4095) = 12
close(3) = 0
write(1, " Treiber: powernow-k8\n", 23) = 23
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/related_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Folgende CPUs laufen mit der g"..., 67) = 67
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/affected_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Die Taktfrequenz folgender CPU"..., 71) = 71
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency", O_RDONLY) = 3
read(3, "109000\n", 4095) = 7
close(3) = 0
write(1, " Maximale Dauer eines Taktfrequ"..., 53) = 53
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " Hardwarebedingte Grenzen der T"..., 65) = 65
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY) = 3
read(3, "2500000 2400000 2200000 2000000 "..., 4095) = 49
close(3) = 0
write(1, " m\303\266gliche Taktfrequenzen: 2.50"..., 87) = 87
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors", O_RDONLY) = 3
read(3, "ondemand performance \n", 4095) = 22
close(3) = 0
write(1, " m\303\266gliche Regler: ondemand, pe"..., 42) = 42
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", O_RDONLY) = 3
read(3, "ondemand\n", 4095) = 9
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " momentane Taktik: die Frequenz"..., 71) = 71
write(1, " liegen. Der "..., 153) = 153
write(1, " momentane Taktfrequenz ist 100"..., 39) = 39
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state", O_RDONLY) = 3
read(3, <unfinished ...>) = ?
+++ killed by SIGKILL +++
execve("/usr/bin/cpufreq-info", ["cpufreq-info"], 0xffcc8e90 /* 36 vars */) = 0
brk(NULL) = 0x5658c000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf771d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib", {st_mode=S_IFDIR|0755, st_size=248, ...}) = 0
openat(AT_FDCWD, "tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=220379, ...}) = 0
mmap2(NULL, 220379, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf76e7000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/usr/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@#\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=26160, ...}) = 0
mmap2(NULL, 28884, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf76df000
mmap2(0xf76e1000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf76e1000
mmap2(0xf76e3000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xf76e3000
mmap2(0xf76e5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0xf76e5000
close(3) = 0
openat(AT_FDCWD, "[redacted]/lib/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/lib/i386-linux-gnu/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\254\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1947056, ...}) = 0
mmap2(NULL, 1955712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf7501000
mprotect(0xf751a000, 1830912, PROT_NONE) = 0
mmap2(0xf751a000, 1368064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19000) = 0xf751a000
mmap2(0xf7668000, 458752, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x167000) = 0xf7668000
mmap2(0xf76d9000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d7000) = 0xf76d9000
mmap2(0xf76dc000, 10112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xf76dc000
close(3) = 0
set_thread_area({entry_number=-1, base_addr=0xf771e500, limit=0x0fffff, seg_32bit=1, contents=0, read_exec_only=0, limit_in_pages=1, seg_not_present=0, useable=1}) = 0 (entry_number=12)
mprotect(0xf76d9000, 8192, PROT_READ) = 0
mprotect(0xf76e5000, 4096, PROT_READ) = 0
mprotect(0x5658a000, 4096, PROT_READ) = 0
mprotect(0xf774a000, 4096, PROT_READ) = 0
munmap(0xf76e7000, 220379) = 0
brk(NULL) = 0x5658c000
brk(0x565ad000) = 0x565ad000
brk(0x565ae000) = 0x565ae000
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=9814000, ...}) = 0
mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7301000
mmap2(NULL, 2596864, PROT_READ, MAP_PRIVATE, 3, 0xb8000) = 0xf7087000
close(3) = 0
fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0x88, 0), ...}) = 0
write(1, "cpufrequtils 008: cpufreq-info ("..., 63) = 63
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0
read(3, "# Locale name alias data base.\n#"..., 4096) = 2995
read(3, "", 4096) = 0
close(3) = 0
openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/cpufrequtils.mo", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=10540, ...}) = 0
mmap2(NULL, 10540, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf771a000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=26400, ...}) = 0
mmap2(NULL, 26400, PROT_READ, MAP_SHARED, 3, 0) = 0xf7713000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=13736, ...}) = 0
mmap2(NULL, 16420, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf770e000
mmap2(0xf770f000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0xf770f000
mmap2(0xf7710000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7710000
mmap2(0xf7711000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7711000
close(3) = 0
mprotect(0xf7711000, 4096, PROT_READ) = 0
write(1, "Bitte melden Sie Fehler an cpufr"..., 52) = 52
openat(AT_FDCWD, "/proc/stat", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(3, "cpu 1374 0 870 24647 5573 0 16 "..., 1024) = 1024
read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "..., 1024) = 266
read(3, "", 1024) = 0
close(3) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
write(1, "analysiere CPU 0:\n", 18) = 18
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq", O_RDONLY) = -1 EACCES (Keine Berechtigung)
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver", O_RDONLY) = 3
read(3, "powernow-k8\n", 4095) = 12
close(3) = 0
write(1, " Treiber: powernow-k8\n", 23) = 23
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/related_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Folgende CPUs laufen mit der g"..., 67) = 67
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/affected_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Die Taktfrequenz folgender CPU"..., 71) = 71
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency", O_RDONLY) = 3
read(3, "109000\n", 4095) = 7
close(3) = 0
write(1, " Maximale Dauer eines Taktfrequ"..., 53) = 53
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " Hardwarebedingte Grenzen der T"..., 65) = 65
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY) = 3
read(3, "2500000 2400000 2200000 2000000 "..., 4095) = 49
close(3) = 0
write(1, " m\303\266gliche Taktfrequenzen: 2.50"..., 87) = 87
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors", O_RDONLY) = 3
read(3, "ondemand performance \n", 4095) = 22
close(3) = 0
write(1, " m\303\266gliche Regler: ondemand, pe"..., 42) = 42
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", O_RDONLY) = 3
read(3, "ondemand\n", 4095) = 9
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " momentane Taktik: die Frequenz"..., 71) = 71
write(1, " liegen. Der "..., 153) = 153
write(1, " momentane Taktfrequenz ist 100"..., 39) = 39
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state", O_RDONLY) = 3
read(3,
