Luis Godoy Gonzalez wrote: > Hello > > I have a problem with the installation of the Cluster Suite. I've > configured 2 nodes cluster, add some services to test de installation > and this worked OK. > > But when I configured "bond" for ethernet interfaces, the communication > between the Cluster nodes doesn't work well. Although networking at IP > level works fine, when I reboot one of the nodes the other one goes to > kernel panic. > > I've lost a lot of time debbuging this problem and I finally decide to > replace one switch ( D-Link DGS-1016D Gigabit Switch ) putting another > from other installation ( D-Link 10/100 ) and the cluster Works Fine now. > > But Now, I'm not sure if the problem is with the hardware switch ( > D-Link ) or with the software. > Any ideas ? > > I have RHE4 U2 and Cluster Suite 4 U2 using HP DL380 and external RAID. > > Some error messages are below > > --------------------------------------------------------- > # SM: 03000002 process_stop_request: uevent already set > > SM: Assertion failed on line 106 of file > /usr/src/build/615121-i686/BUILD/cman- > kernel-2.6.9-39/smp/src/sm_membership.c > SM: assertion: "node" > SM: time = 256523 > nodeid=1 > This was fixed in U3 -- patrick -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
