Hello
I have a problem with the installation of the Cluster Suite. I've
configured 2 nodes cluster, add some services to test de installation
and this worked OK.
But when I configured "bond" for ethernet interfaces, the communication
between the Cluster nodes doesn't work well. Although networking at IP
level works fine, when I reboot one of the nodes the other one goes to
kernel panic.
I've lost a lot of time debbuging this problem and I finally decide to
replace one switch ( D-Link DGS-1016D Gigabit Switch ) putting another
from other installation ( D-Link 10/100 ) and the cluster Works Fine now.
But Now, I'm not sure if the problem is with the hardware switch (
D-Link ) or with the software.
Any ideas ?
I have RHE4 U2 and Cluster Suite 4 U2 using HP DL380 and external RAID.
Some error messages are below
---------------------------------------------------------
# SM: 03000002 process_stop_request: uevent already set
SM: Assertion failed on line 106 of file
/usr/src/build/615121-i686/BUILD/cman-
kernel-2.6.9-39/smp/src/sm_membership.c
SM: assertion: "node"
SM: time = 256523
nodeid=1
Kernel panic - not syncing: SM: Record message above and reboot.
----------------------------------------------------------------------
Thanks in advance for any help.
Luis G.
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
